Thermal Spray Fabrication of Heat Transfer Surfaces and Devices

Thermal Spray Fabrication of Heat Transfer Surfaces and Devices
Author: Andre McDonald,Sanjeev Chandra,Milad Rezvani-Rad,Adrian Lopera-Valle
Publsiher: Elsevier
Total Pages: 416
Release: 2021-03-01
ISBN 10: 0128179813
ISBN 13: 9780128179819
Language: EN, FR, DE, ES & NL

Thermal Spray Fabrication of Heat Transfer Surfaces and Devices Book Review:

Thermal Spray Fabrication of Heat Transfer Surfaces and Devices reviews the current state of research on select processes for the development of coatings-based heat transfer surfaces and devices, focusing on materials selection, fabrication processes and materials characterization. Analytical modeling and experiments aimed at quantifying the performance of heat transfer surfaces and devices are presented, along with case studies that reinforce the outcomes of analytical models. The included information helps guide readers to industrial situations in which the coatings or devices may be applied. Describes thermal-sprayed coatings in terms of their development as heat transfer surfaces or devices Provides predictive models for the thermal performance of surfaces or devices Presents case studies that describe potential, practical situations in which coatings or devices may be applied

Thermal Spray 2006

Thermal Spray 2006
Author: Basil Richard Marple
Publsiher: ASM International
Total Pages: 394
Release: 2006
ISBN 10: 1615031219
ISBN 13: 9781615031214
Language: EN, FR, DE, ES & NL

Thermal Spray 2006 Book Review:

Advances in Heat Transfer

Advances in Heat Transfer
Author: Anonim
Publsiher: Academic Press
Total Pages: 350
Release: 2016-10-25
ISBN 10: 0128051752
ISBN 13: 9780128051757
Language: EN, FR, DE, ES & NL

Advances in Heat Transfer Book Review:

Advances in Heat Transfer fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles that are from a broader scope than in traditional journals or texts. The articles, which serve as a broad review for experts in the field, are also of great interest to non-specialists who need to keep up-to-date on the results of the latest research. This serial is essential reading for all mechanical, chemical, and industrial engineers working in the field of heat transfer, or in graduate schools or industry. Compiles the expert opinions of leaders in the industry Fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in traditional journals or texts Essential reading for all mechanical, chemical, and industrial engineers working in the field of heat transfer, or in graduate schools or industry

Handbook of Thermal Spray Technology

Handbook of Thermal Spray Technology
Author: Joseph R. Davis
Publsiher: ASM International
Total Pages: 338
Release: 2004-01-01
ISBN 10: 0871707950
ISBN 13: 9780871707956
Language: EN, FR, DE, ES & NL

Handbook of Thermal Spray Technology Book Review:

This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th

Heat Transfer 1994

Heat Transfer 1994
Author: G. F. Hewitt
Publsiher: CRC Press
Total Pages: 3500
Release: 1994
ISBN 10: 9781560323341
ISBN 13: 1560323345
Language: EN, FR, DE, ES & NL

Heat Transfer 1994 Book Review:

Tool and Manufacturing Engineers Handbook: Plastic Part Manufacturing

Tool and Manufacturing Engineers Handbook: Plastic Part Manufacturing
Author: Philip Mitchell
Publsiher: Society of Manufacturing Engineers
Total Pages: 706
Release: 1996-12-09
ISBN 10: 0872634566
ISBN 13: 9780872634565
Language: EN, FR, DE, ES & NL

Tool and Manufacturing Engineers Handbook: Plastic Part Manufacturing Book Review:

This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.

Tool and Manufacturing Engineers Handbook Desk Edition

Tool and Manufacturing Engineers Handbook Desk Edition
Author: W. H. Cubberly
Publsiher: Society of Manufacturing Engineers
Total Pages: 1250
Release: 1989
ISBN 10: 0872633519
ISBN 13: 9780872633513
Language: EN, FR, DE, ES & NL

Tool and Manufacturing Engineers Handbook Desk Edition Book Review:

The TMEH Desk Edition presents a unique collection of manufacturing information in one convenient source. Contains selected information from TMEH Volumes 1-5--over 1,200 pages of manufacturing information. A total of 50 chapters cover topics such as machining, forming, materials, finishing, coating, quality control, assembly, and management. Intended for daily use by engineers, managers, consultants, and technicians, novice engineers or students.

Thermal Spray Fundamentals

Thermal Spray Fundamentals
Author: Pierre L. Fauchais,Joachim V.R. Heberlein,Maher I. Boulos
Publsiher: Springer Science & Business Media
Total Pages: 1566
Release: 2014-01-24
ISBN 10: 0387689915
ISBN 13: 9780387689913
Language: EN, FR, DE, ES & NL

Thermal Spray Fundamentals Book Review:

This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.

Transport Phenomena in Capillary-Porous Structures and Heat Pipes

Transport Phenomena in Capillary-Porous Structures and Heat Pipes
Author: Henry Smirnov
Publsiher: CRC Press
Total Pages: 400
Release: 2009-07-29
ISBN 10: 9781420062076
ISBN 13: 1420062077
Language: EN, FR, DE, ES & NL

Transport Phenomena in Capillary-Porous Structures and Heat Pipes Book Review:

Two-phase nano- and micro-thermal control device research is now proving relevant to a growing range of modern applications, including those in cryogenics, thermal engineering, MEMS, and aerospace engineering. Until now, researchers have lacked a definitive resource that provides a complete review of micro- and nano-scale evaporative heat and mass transfer in capillaries-porous structures. Transport Phenomena in Capillary-Porous Structures and Heat Pipes covers the latest experiemental research efforts in two-phase thermal control technology research and development. The book covers vaporization heat transfer and hydrodynamic processes occurring in capillary channels and porous structures—paying particular attention to the physical mechanisms of these phenomena. Extensive experimental research activities on unique film and photo materials of boiling inside slits, capillaries, and capillary-porous structures are reviewed. By providing a complete record of research in the field, this volume gives researchers, engineers, and practitioners working on vaporization heat transfer and hydrodynamic processes the findings needed to avoid unnecessary experimental efforts, and will help further the development of this dynamic area of research.

Heat Transfer in Manufacturing and Materials Processing

Heat Transfer in Manufacturing and Materials Processing
Author: R. K. Shah,American Society of Mechanical Engineers. Heat Transfer Division
Publsiher: Amer Society of Mechanical
Total Pages: 149
Release: 1989
ISBN 10:
ISBN 13: UOM:39015015302113
Language: EN, FR, DE, ES & NL

Heat Transfer in Manufacturing and Materials Processing Book Review:

Engineering Solutions and Technologies in Manufacturing

Engineering Solutions and Technologies in Manufacturing
Author: Lauren?iu Sl?tineanu,Vasile Merticaru,Gheorghe Nagit,Margareta Coteata,Eugen Axinte,Petru Du?a,Gavril Musca,Laurentiu Ghenghea,Florin Negoescu,Octavian Lupescu,Irina Ti?a,Oana Dodun
Publsiher: Trans Tech Publications Ltd
Total Pages: 1128
Release: 2014-10-08
ISBN 10: 3038266590
ISBN 13: 9783038266594
Language: EN, FR, DE, ES & NL

Engineering Solutions and Technologies in Manufacturing Book Review:

Collection of Selected, Peer Reviewed Papers from the Innovative Manufacturing Engineering Conference 2014 (IManE 2014), May 29-30, Chisinau, Republic of Moldova. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 213 papers are grouped as follows: Chapter 1: Advanced Machining Technologies and Surface Engineering, Chapter 2: Forming Technologies, Chapter 3: Electrophysical, Welding and Assembly Technologies in Manufacturing, Chapter 4: Advanced Materials, Chapter 5: Researching and Designing of Manufacturing Equipment, Machine Parts and Mechanisms, Chapter 6: CAD/CAM/CAE Technologies in Design and Manufacturing, Chapter 7: Flexible Manufacturing, Automation and Robotics in Technological Processes, Chapter 8: Production Management and Product Design, Chapter 9: Innovative Technologies in Engineering Education

Heat Transfer in Electronic Equipment, 1991

Heat Transfer in Electronic Equipment, 1991
Author: American Society of Mechanical Engineers. Heat Transfer Division
Publsiher: Amer Society of Mechanical
Total Pages: 143
Release: 1991
ISBN 10:
ISBN 13: UOM:39015024972294
Language: EN, FR, DE, ES & NL

Heat Transfer in Electronic Equipment, 1991 Book Review:

Welding Design & Fabrication

Welding Design & Fabrication
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release: 1987
ISBN 10:
ISBN 13: UIUC:30112008821461
Language: EN, FR, DE, ES & NL

Welding Design & Fabrication Book Review:

Advanced Materials & Processes

Advanced Materials & Processes
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release: 1998
ISBN 10:
ISBN 13: UVA:X006032934
Language: EN, FR, DE, ES & NL

Advanced Materials & Processes Book Review:

Advances in Heat Transfer, Flow Engineering and Energy Installations

Advances in Heat Transfer, Flow Engineering and Energy Installations
Author: Mazlan Abdul Wahid,Syahrullail Samion,Aminuddin Saat,Nor Azwadi Che Sidik,Normah Mohd Ghazali,Nazri Kamsah,Azhar Abdul Aziz,Farid Nasir Ani,Haslinda Mohamed Kamar,Mohsin Sies
Publsiher: Trans Tech Publications Ltd
Total Pages: 690
Release: 2016-01-06
ISBN 10: 3035701555
ISBN 13: 9783035701555
Language: EN, FR, DE, ES & NL

Advances in Heat Transfer, Flow Engineering and Energy Installations Book Review:

Collection of selected, peer reviewed papers from the 7th International Meeting on Advances in Thermofluids (IMAT 2014), November 26-27, 2014, Kuala Lumpur, Malaysia. The 105 papers are grouped as follows: Chapter 1: Keynote Papers Chapter 2: Heat Transfer and Thermal Management Chapter 3: Ventilation and Air Conditioning Chapter 4: Combustion and Detonation Chapter 5: Fluid Mechanics Chapter 6: Engines Chapter 7: Engineering Tribology Chapter 8: Renewable and Alternative Energy System Chapter 9: Research and Design of Related Machines and Technologies

Thomas Register of American Manufacturers and Thomas Register Catalog File

Thomas Register of American Manufacturers and Thomas Register Catalog File
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release: 2003
ISBN 10:
ISBN 13: UOM:39015058389696
Language: EN, FR, DE, ES & NL

Thomas Register of American Manufacturers and Thomas Register Catalog File Book Review:

Vols. for 1970-71 includes manufacturers' catalogs.

Heat Transfer

Heat Transfer
Author: Konstantin Volkov
Publsiher: BoD – Books on Demand
Total Pages: 370
Release: 2018-06-27
ISBN 10: 1789232643
ISBN 13: 9781789232646
Language: EN, FR, DE, ES & NL

Heat Transfer Book Review:

The book focuses on new analytical, experimental, and computational developments in the field of research of heat and mass transfer phenomena. The generation, conversion, use, and exchange of thermal energy between physical systems are considered. Various mechanisms of heat transfer such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes are presented. Theory and fundamental research in heat and mass transfer, numerical simulations and algorithms, experimental techniques, and measurements as they applied to all kinds of applied and emerging problems are covered.

Metals Abstracts

Metals Abstracts
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release: 1998
ISBN 10:
ISBN 13: CORNELL:31924077935579
Language: EN, FR, DE, ES & NL

Metals Abstracts Book Review:

Worldwide Automotive Supplier Directory

Worldwide Automotive Supplier Directory
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release: 2002
ISBN 10:
ISBN 13: UOM:39015047886844
Language: EN, FR, DE, ES & NL

Worldwide Automotive Supplier Directory Book Review:

Chemical Abstracts

Chemical Abstracts
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release: 2002
ISBN 10:
ISBN 13: UOM:39015057321351
Language: EN, FR, DE, ES & NL

Chemical Abstracts Book Review: