Plastics Engineering

Plastics Engineering
Author: R.J. Crawford
Publsiher: Elsevier
Total Pages: 364
Release: 2013-10-22
ISBN 10: 0080952100
ISBN 13: 9780080952109
Language: EN, FR, DE, ES & NL

Plastics Engineering Book Review:

The first textbook to cover both properties and processing of reinforced and unreinforced plastics to this level. It assumes no prior knowledge of plastics and emphasizes the practical aspects of the subject. In this second edition over half the book has been rewritten and the remainder has been updated and reorganized. Early chapters give an introduction to the types of plastics which are currently available and describe how a designer goes about selection of a plastic for a particular application. Later chapters lead the reader into more advanced aspects of mechanical design and analysis of polymer melt flow. All techniques developed are illustrated by numerous worked examples, and several problems are given at the end of each chapter - the solutions to which form an Appendix.

Introduction to Plastics Engineering

Introduction to Plastics Engineering
Author: Anshuman Shrivastava
Publsiher: William Andrew
Total Pages: 262
Release: 2018-05-15
ISBN 10: 0323396194
ISBN 13: 9780323396196
Language: EN, FR, DE, ES & NL

Introduction to Plastics Engineering Book Review:

Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book incorporates material properties, engineering, processing, design, applications and sustainable and bio based solutions. Ideal for those just entering the industry, or transitioning between sectors, this is a quick, relevant and informative reference guide to plastics engineering and processing for engineers and plastics practitioners. Provides a single unified reference covering plastics materials, properties, design, processing and applications Offers end-to-end coverage of the industry, from formulation to part design, processing, and the final product Serves as an ideal introductory book for new plastics engineers and students of plastics engineering Provides a convenient reference for more experienced practitioners

Introduction to Plastics Engineering

Introduction to Plastics Engineering
Author: Vijay K. Stokes
Publsiher: John Wiley & Sons
Total Pages: 1016
Release: 2020-05-11
ISBN 10: 111953657X
ISBN 13: 9781119536574
Language: EN, FR, DE, ES & NL

Introduction to Plastics Engineering Book Review:

The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Plastics Engineering Handbook Of The Society Of The Plastics Industry

Plastics Engineering Handbook Of The Society Of The Plastics Industry
Author: Society of the Plastics Industry
Publsiher: Springer Science & Business Media
Total Pages: 870
Release: 1991-08-31
ISBN 10: 9780412991813
ISBN 13: 0412991810
Language: EN, FR, DE, ES & NL

Plastics Engineering Handbook Of The Society Of The Plastics Industry Book Review:

Comprehensive guide to plastics processing methods, equipment and materials

Plastics Engineering

Plastics Engineering
Author: R. J Crawford,P. J. Martin
Publsiher: Butterworth-Heinemann
Total Pages: 638
Release: 2020-01-22
ISBN 10: 0081007108
ISBN 13: 9780081007105
Language: EN, FR, DE, ES & NL

Plastics Engineering Book Review:

Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end. This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included. Gives new engineers and technologists a thorough understanding of the essential properties and processing behavior of plastics and composites Presents a great source of foundational information for students, early-career engineers and researchers Demonstrates how basic engineering principles in design, mechanics of materials, fluid mechanics and thermodynamics may be applied to the properties, processing and performance of modern plastic materials

Applied Plastics Engineering Handbook

Applied Plastics Engineering Handbook
Author: Myer Kutz
Publsiher: William Andrew
Total Pages: 574
Release: 2011-08-09
ISBN 10: 1437735142
ISBN 13: 9781437735147
Language: EN, FR, DE, ES & NL

Applied Plastics Engineering Handbook Book Review:

A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics - helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing - and recent developments - enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb

Plastics Institute of America Plastics Engineering Manufacturing Data Handbook

Plastics Institute of America Plastics Engineering  Manufacturing   Data Handbook
Author: D.V. Rosato,Nick R. Schott,Marlene G. Rosato
Publsiher: Springer Science & Business Media
Total Pages: 2006
Release: 2001-11-30
ISBN 10: 9780792373162
ISBN 13: 0792373162
Language: EN, FR, DE, ES & NL

Plastics Institute of America Plastics Engineering Manufacturing Data Handbook Book Review:

This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements in different environments to reducing costs and targeting for zero defects. This book provides the reader with useful pertinent information readily available as summarized in the Table of Contents, List of References and the Index.

Applied Plastics Engineering Handbook

Applied Plastics Engineering Handbook
Author: Myer Kutz
Publsiher: William Andrew
Total Pages: 784
Release: 2016-09-15
ISBN 10: 0323390412
ISBN 13: 9780323390415
Language: EN, FR, DE, ES & NL

Applied Plastics Engineering Handbook Book Review:

Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics

Dynamic Mechanical Analysis for Plastics Engineering

Dynamic Mechanical Analysis for Plastics Engineering
Author: Michael Sepe
Publsiher: William Andrew
Total Pages: 199
Release: 1999-01-14
ISBN 10: 9781884207648
ISBN 13: 1884207642
Language: EN, FR, DE, ES & NL

Dynamic Mechanical Analysis for Plastics Engineering Book Review:

As plastics are being used more extensively in high-performance markets, it is imperative that designers and engineers understand all aspects of polymer behavior over an extended service life. Dynamic Mechanical Analysis for Plastics Engineering describes practical uses for DMA information. All of the information for 120 families of thermoplastics is based on independent test data conducted exclusively for this product and is not available through any other source. This PDL addition shows how to use the DMA data to predict, at various temperatures, each materials estimated service life and potential for failure. This book explains the correlation between time and temperature-dependence and illustrates how time-dependent responses such as creep and stress relaxation affect the practical utility of different materials. Basic polymer structures are discussed and test results show how these structural details can be detected and understood.

SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc

SPI Plastics Engineering Handbook of the Society of the Plastics Industry  Inc
Author: Michael L. Berins
Publsiher: Springer Science & Business Media
Total Pages: 845
Release: 2012-12-06
ISBN 10: 1461576040
ISBN 13: 9781461576044
Language: EN, FR, DE, ES & NL

SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc Book Review:

I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.

Introduction to Bioplastics Engineering

Introduction to Bioplastics Engineering
Author: Syed Ali Ashter
Publsiher: William Andrew
Total Pages: 300
Release: 2016-03-29
ISBN 10: 0323394078
ISBN 13: 9780323394079
Language: EN, FR, DE, ES & NL

Introduction to Bioplastics Engineering Book Review:

Introduction to Bioplastics Engineering is a practical, user-friendly reference for plastics engineers working with biopolymers and biodegradable plastics that addresses topics that are required for the successful development of cohesive bioplastic products. While there has been considerable demand for the use of bioplastics in industry, processing these bioplastics is a big challenge. The book provides plastics engineers and researchers with a fundamental, practical understanding of the differences between bioplastics and biodegradable polymers, along with guidance on the different methods used to process bioplastics. The book also covers additives and modifiers for biopolymers and their effect on properties. Examples include commercial applications of bioplastics, current bioplastics being developed, and future trends in the industry. This enables engineers, researchers, technicians, and students to understand the decisive relationship between different processing techniques, morphology, mechanical properties, and the further applications of bio-based polymers. The book presents a true engineering approach for the industry on the processing of biopolymers and biodegradable plastics – discussing the ease of use of the polymer, mechanical and thermal properties, rate of biodegradation in particular environments, and pros and cons of particular bioplastics. Enables engineers, researchers, technicians, and students to understand the decisive relationship between different processing techniques, morphology, mechanical properties, and the further applications of bio-based polymers. Covers additives and modifiers for biopolymers and their effect on properties Includes examples that illustrate the commercial applications of bioplastics, current bioplastics being developed, and future trends in the industry

Life Cycle Engineering of Plastics

Life Cycle Engineering of Plastics
Author: L. Lundquist,Y. Leterrier,P. Sunderland,J.A.E. Månson
Publsiher: Elsevier
Total Pages: 220
Release: 2001-01-23
ISBN 10: 9780080535470
ISBN 13: 008053547X
Language: EN, FR, DE, ES & NL

Life Cycle Engineering of Plastics Book Review:

"This book adds much to the already evolving field of Design for Environment; but it goes far beyond most works on this subject by surrounding the central notions of life cycle assessment with a scientific body of knowledge and with a more practical slant reflecting the reality of the organizations in which product development occurs. Through a focus on plastic products, the authors show the importance of making ties between basic technical knowledge and the process of life cycle engineering. Their approach offers a practical, deliberate way to make ecologically and economically sensible decisions about product reuse and recycling and other critical dimensions of product life behavior. They demonstrate a positive approach to designing products that fits into a sustainable economy through down-to-earth cases. While the book focuses on the life cycle engineering of plastics, it is only a short step to other materials and products. Beyond contributing to the technology of life cycle engineering, this text adds to the growing body of knowledge that argues for an fundamentally new way of thinking about economic and social activity--a new paradigm for sustainable social and industrial problem solving. Industrial ecology is such a new system for thinking about and implementing sustainability that draws its core set of ideas from the ecological world. Industrial ecology brings to the surface the idea of interdependence among members of a community-- natural or economic, and notes the material cycles that are central to a stable ecosystem. The life cycle engineering framework, coupled with sound scientific knowledge of materials behavior as articulated in this book, makes a giant step towards bringing the model of industrial ecology into everyday practice." From the Preface by John R. Ehrenfeld Director, MIT Technology, Business and Environment Program Center for Technology, Policy, and Industrial Development

Plastics Engineering

Plastics Engineering
Author: Anonim
Publsiher: Unknown
Total Pages: 329
Release: 1985
ISBN 10:
ISBN 13: UCSD:31822016043408
Language: EN, FR, DE, ES & NL

Plastics Engineering Book Review:

Engineering Thermoplastics

Engineering Thermoplastics
Author: James M. Margolis
Publsiher: CRC Press
Total Pages: 408
Release: 2020-10-28
ISBN 10: 1000104117
ISBN 13: 9781000104110
Language: EN, FR, DE, ES & NL

Engineering Thermoplastics Book Review:

This book provides solutions to many vital questions on the important property differences and advantages of individual engineering thermoplastics. It is useful for executives; managers; design, materials, and sales engineers; researchers; materials and product manufacturers; and compounders.

Plastics Fabrication and Recycling

Plastics Fabrication and Recycling
Author: Manas Chanda,Salil K. Roy
Publsiher: CRC Press
Total Pages: 216
Release: 2016-04-19
ISBN 10: 9781420080636
ISBN 13: 1420080636
Language: EN, FR, DE, ES & NL

Plastics Fabrication and Recycling Book Review:

Derived from the fourth edition of the well-known Plastics Technology Handbook, Plastics Fabrication and Recycling presents the molding and fabrication processes of plastics as well as several important features of plastics recycling. The book begins with a discussion of different types of molds and dies, including compression molding, injection molding, blow molding, thermoforming, reaction injection molding, extrusion, and pultrusion. It then covers spinning, casting, reinforcing, foaming, compounding, and coating processes as well as powder molding, adhesive bonding, and plastics welding techniques. The authors also explore the decoration of plastics, including painting operations, printing processes, hot stamping, in-mold decorating, embossing, electroplating, and vacuum metallizing. They conclude with an overview on key aspects of plastics recycling, developments in the field, and waste recycling problems.

Practical Guide To Injection Blow Molding

Practical Guide To Injection Blow Molding
Author: Samuel L. Belcher
Publsiher: CRC Press
Total Pages: 184
Release: 2007-03-05
ISBN 10: 1420014811
ISBN 13: 9781420014815
Language: EN, FR, DE, ES & NL

Practical Guide To Injection Blow Molding Book Review:

Injection blow molding is one of the main processes used in the blow molding industry. And although you may find information on this topic in general books on blow molding, the coverage is skimpy and lacking in details. None of them supply the sharply focused, essential information you will find in Samuel Belcher's Practical Guide to Injection B

Plastics Engineering Handbook of the Society of the Plastics Industry Inc

Plastics Engineering Handbook of the Society of the Plastics Industry  Inc
Author: Society of the Plastics Industry
Publsiher: Van Nostrand Reinhold Company
Total Pages: 909
Release: 1976
ISBN 10:
ISBN 13: UOM:39015002018706
Language: EN, FR, DE, ES & NL

Plastics Engineering Handbook of the Society of the Plastics Industry Inc Book Review:

Plastics Engineering Third Edition

Plastics Engineering  Third Edition
Author: R. J. Crawford
Publsiher: Unknown
Total Pages: 329
Release: 2021
ISBN 10:
ISBN 13: OCLC:1060194834
Language: EN, FR, DE, ES & NL

Plastics Engineering Third Edition Book Review:

SPI Plastics Engineering Handbook

SPI Plastics Engineering Handbook
Author: Society of the Plastics Industry
Publsiher: Unknown
Total Pages: 565
Release: 1960
ISBN 10:
ISBN 13: MINN:31951000808928V
Language: EN, FR, DE, ES & NL

SPI Plastics Engineering Handbook Book Review:

Plastics Technology Handbook Fourth Edition

Plastics Technology Handbook  Fourth Edition
Author: Manas Chanda,Salil K. Roy
Publsiher: CRC Press
Total Pages: 896
Release: 2006-12-19
ISBN 10: 1420006363
ISBN 13: 9781420006360
Language: EN, FR, DE, ES & NL

Plastics Technology Handbook Fourth Edition Book Review:

Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.