Statics and Mechanics of Materials

Statics and Mechanics of Materials
Author: William F. Riley,Leroy D. Sturges,Don H. Morris
Publsiher: John Wiley & Sons Incorporated
Total Pages: 723
Release: 2002
ISBN 10:
ISBN 13: STANFORD:36105025768453
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials Book Review:

* Use of Free-Body Diagrams. Authors, Riley, Sturges and Morris, feel that a proper free-body diagram is very important in all mechanics courses. Whenever an equation of equilibrium is written, a complete, proper free-body diagram accompanies it. * Problem Solving Procedures. Statics and Mechanics of Materials: An Integrated Approach provides students with an effective methodology for problem decomposition and solution, the ability to present results in a clear, and logical manner is emphasized throughout the text. * Homework Problems. Over 1100 homework problems allow for varied problem assignments. Each set of problems represents a range of difficulty and is grouped according to this range of difficulty. * SI vs. U.S. Customary Units are used in equal proportions in the text for both example and homework problems.

Solution Manual to Statics and Mechanics of Materials an Integrated Approach Second Edition

Solution Manual to Statics and Mechanics of Materials an Integrated Approach  Second Edition
Author: Anonim
Publsiher: MDN10
Total Pages: 329
Release:
ISBN 10:
ISBN 13:
Language: EN, FR, DE, ES & NL

Solution Manual to Statics and Mechanics of Materials an Integrated Approach Second Edition Book Review:

This book is the solution manual to Statics and Mechanics of Materials an Integrated Approach (Second Edition) which is written by below persons. William F. Riley, Leroy D. Sturges, Don H. Morris

Thermodynamics and Statistical Mechanics

Thermodynamics and Statistical Mechanics
Author: M. Scott Shell
Publsiher: Cambridge University Press
Total Pages: 500
Release: 2015-04-16
ISBN 10: 1107014530
ISBN 13: 9781107014534
Language: EN, FR, DE, ES & NL

Thermodynamics and Statistical Mechanics Book Review:

Learn classical thermodynamics alongside statistical mechanics and how macroscopic and microscopic ideas interweave with this fresh approach to the subjects.

Introduction to Solid Mechanics

Introduction to Solid Mechanics
Author: Jacob Lubliner,Panayiotis Papadopoulos
Publsiher: Springer
Total Pages: 533
Release: 2016-10-12
ISBN 10: 331918878X
ISBN 13: 9783319188782
Language: EN, FR, DE, ES & NL

Introduction to Solid Mechanics Book Review:

This expanded second edition presents in one text the concepts and processes covered in statics and mechanics of materials curricula following a systematic, topically integrated approach. Building on the novel pedagogy of fusing concepts covered in traditional undergraduate courses in rigid-body statics and deformable body mechanics, rather than simply grafting them together, this new edition develops further the authors’ very original treatment of solid mechanics with additional figures, an elaboration on selected solved problems, and additional text as well as a new subsection on viscoelasticity in response to students’ feedback. Introduction to Solid Mechanics: An Integrated Approach, Second Edition, offers a holistic treatment of the depth and breadth of solid mechanics and the inter-relationships of its underlying concepts. Proceeding from first principles to applications, the book stands as a whole greater than the sum of its parts.

Statics and Mechanics of Materials

Statics and Mechanics of Materials
Author: James Gere,Barry Goodno
Publsiher: Cengage Learning
Total Pages: 1200
Release: 2017-03-15
ISBN 10: 1305537351
ISBN 13: 9781305537354
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials Book Review:

Master two essential subjects in engineering mechanics -- statics and mechanics of materials -- with the rigorous, complete, and integrated treatment found in STATICS AND MECHANICS OF MATERIALS. This book helps readers establish a strong foundation for further study in mechanics that is essential for mechanical, structural, civil, biomedical, petroleum, nuclear, aeronautical, or aerospace engineers. The authors present numerous practical problems based on real structures, using state-of-the-art graphics, photos, and detailed drawings of free body diagrams. All example problems and end-of-chapter problem solutions use a comprehensive, organized, and systematic Problem Solving Approach to help readers strengthen important problem-solving skills and gain new insight into methods for dissecting and solving problems. This book also contains more than 150 FE-type review problems to help prepare for success on the FE Exams. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Statics and Mechanics of Materials

Statics and Mechanics of Materials
Author: R. C. Hibbeler
Publsiher: Prentice Hall
Total Pages: 899
Release: 2014
ISBN 10: 9789814526043
ISBN 13: 9814526045
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials Book Review:

Mechanics of Materials

Mechanics of Materials
Author: Clarence W. de Silva
Publsiher: CRC Press
Total Pages: 466
Release: 2013-08-23
ISBN 10: 1439877378
ISBN 13: 9781439877371
Language: EN, FR, DE, ES & NL

Mechanics of Materials Book Review:

A systematic presentation of theory, procedures, illustrative examples, and applications, Mechanics of Materials provides the basis for understanding structural mechanics in engineering systems such as buildings, bridges, vehicles, and machines. The book incorporates the fundamentals of the subject into analytical methods, modeling approaches, numerical methods, experimental procedures, numerical evaluation procedures, and design techniques. It introduces the fundamentals, and then moves on to more advanced concepts and applications. It discusses analytical methods using simple mathematics, examples and experimental techniques, and it includes a large number of worked examples and case studies that illustrate practical and real-world usage. In the beginning of each chapter, states and summarizes the objectives and approaches, and lists the main topics covered in the chapter Presents the key issues and formulas in a "Summary Sheet" at the end of each chapter Provides as appendices at the end of the book, useful reference data and advanced material that cannot be conveniently integrated into the main chapters Mechanics of Materials is a result of the author's experience in teaching an undergraduate course in mechanics of materials consisting of mechanical, manufacturing, materials, mining and mineral engineering students and in teaching other courses in statics, dynamics, modeling, vibration, instrumentation, testing, design, and control. This book is suitable for anyone with a basic engineering background. The practical considerations, design issues, and engineering techniques, and the snapshot-style presentation of advanced theory and concepts, makes this a useful reference for practicing professionals as well.

Statics and Mechanics of Materials

Statics and Mechanics of Materials
Author: Barry J. Goodno,James Gere
Publsiher: Cengage Learning
Total Pages: 1184
Release: 2018-01-01
ISBN 10: 1337517321
ISBN 13: 9781337517324
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials Book Review:

Master two essential subjects in engineering mechanics--statics and mechanics of materials--with the rigorous, complete, and integrated treatment found in STATICS AND MECHANICS OF MATERIALS. This book helps readers establish a strong foundation for further study in mechanics that is essential for mechanical, structural, civil, biomedical, petroleum, nuclear, aeronautical, and aerospace engineers. The authors present numerous practical problems based on real structures, using state-of-the-art graphics, photographs, and detailed drawings of free-body diagrams. All example problems and end-of-chapter problem follow a comprehensive, organized, and systematic Four-Step Problem-Solving Approach to help readers strengthen important problem-solving skills and gain new insight into methods for dissecting and solving problems. The free website also contains nearly 200 FE-type review problems to help prepare for success on the FE Exams. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Fundamentals of Materials Science and Engineering

Fundamentals of Materials Science and Engineering
Author: David G. Rethwisch,William D. Callister
Publsiher: Anonim
Total Pages: 933
Release: 2015
ISBN 10: 9781119230403
ISBN 13: 1119230403
Language: EN, FR, DE, ES & NL

Fundamentals of Materials Science and Engineering Book Review:

This package includes a three-hole punched, loose-leaf edition of ISBN 9781119175483 and a registration code for the WileyPLUS course associated with the text. Before you purchase, check with your instructor or review your course syllabus to ensure that your instructor requires WileyPLUS. For customer technical support, please visit http://www.wileyplus.com/support. WileyPLUS registration cards are only included with new products. Used and rental products may not include WileyPLUS registration cards. Fundamentals of Materials Science and Engineering: An Integrated Approach, Binder Ready Version, 5th Edition takes an integrated approach to the sequence of topics - one specific structure, characteristic, or property type is covered in turn for all three basic material types: metals, ceramics, and polymeric materials. This presentation permits the early introduction of non-metals and supports the engineer's role in choosing materials based upon their characteristics. Using clear, concise terminology that is familiar to students, Fundamentals presents material at an appropriate level for both student comprehension and instructors who may not have a materials background.

Statics and Mechanics of Materials

Statics and Mechanics of Materials
Author: William F. Riley
Publsiher: Anonim
Total Pages: 329
Release: 2008-06-04
ISBN 10: 9780470418529
ISBN 13: 0470418524
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials Book Review:

Advanced Mechanics of Materials and Applied Elasticity

Advanced Mechanics of Materials and Applied Elasticity
Author: A. C. Ugural,Saul K. Fenster
Publsiher: Prentice Hall
Total Pages: 680
Release: 2011
ISBN 10: 0137079206
ISBN 13: 9780137079209
Language: EN, FR, DE, ES & NL

Advanced Mechanics of Materials and Applied Elasticity Book Review:

Rev. ed. of: Advanced strength and applied elasticity. 4th ed. c2003.

Thermodynamics and Statistical Mechanics

Thermodynamics and Statistical Mechanics
Author: Robert J. Hardy,Christian Binek
Publsiher: John Wiley & Sons
Total Pages: 536
Release: 2014-06-12
ISBN 10: 1118676378
ISBN 13: 9781118676370
Language: EN, FR, DE, ES & NL

Thermodynamics and Statistical Mechanics Book Review:

This textbook brings together the fundamentals of the macroscopic and microscopic aspects of thermal physics by presenting thermodynamics and statistical mechanics as complementary theories based on small numbers of postulates. The book is designed to give the instructor flexibility in structuring courses for advanced undergraduates and/or beginning graduate students and is written on the principle that a good text should also be a good reference. The presentation of thermodynamics follows the logic of Clausius and Kelvin while relating the concepts involved to familiar phenomena and the modern student's knowledge of the atomic nature of matter. Another unique aspect of the book is the treatment of the mathematics involved. The essential mathematical concepts are briefly reviewed before using them, and the similarity of the mathematics to that employed in other fields of physics is emphasized. The text gives in depth treatments of low density gases, harmonic solids, magnetic and dielectric materials, phase transitions, and the concept of entropy. The microcanonical, canonical, and grand canonical ensembles of statistical mechanics are derived and used as the starting point for the analysis of fluctuations, blackbody radiation, the Maxwell distribution, Fermi-Dirac statistics, Bose-Einstein condensation, and the statistical basis of computer simulations. Supplementary material including PowerPoint slides and detailed worked solutions can be downloaded online at http://booksupport.wiley.com

An Integrated Approach to Environmental Management

An Integrated Approach to Environmental Management
Author: Dibyendu Sarkar,Rupali Datta,Avinandan Mukherjee,Robyn Hannigan
Publsiher: John Wiley & Sons
Total Pages: 624
Release: 2015-11-02
ISBN 10: 1118744357
ISBN 13: 9781118744352
Language: EN, FR, DE, ES & NL

An Integrated Approach to Environmental Management Book Review:

Covers the most recent topics in the field of environmental management and provides a broad focus on the theoretical and methodological underpinnings of environmental management Provides an up-to-date survey of the field from the perspective of different disciplines Covers the topic of environmental management from multiple perspectives, namely, natural sciences, engineering, business, social sciences, and methods and tools perspectives Combines both academic rigor and practical approach through literature reviews and theories and examples and case studies from diverse geographic areas and policy domains Explores local and global issues of environmental management and analyzes the role of various contributors in the environmental management process Chapter contents are appropriately demonstrated with numerous pictures, charts, graphs, and tables, and accompanied by a detailed reference list for further readings

Parasitology

Parasitology
Author: Alan Gunn,Sarah Jane Pitt
Publsiher: John Wiley & Sons
Total Pages: 456
Release: 2012-04-30
ISBN 10: 0470684240
ISBN 13: 9780470684245
Language: EN, FR, DE, ES & NL

Parasitology Book Review:

Parasitology: An Integrated Approach, provides a concise, student-friendly account of parasites and parasite relationships that is supported by case studies and suggestions for student projects. The book focuses strongly on parasite interactions with other pathogens and in particular parasite-HIV interactions, as well as looking at how host behaviour contributes to the spread of infections. There is a consideration of the positive aspects of parasite infections, how humans have used parasites for their own advantage and also how parasite infections affect the welfare of captive and domestic animals. The emphasis of Parasitology is on recent research throughout and each chapter ends with a brief discussion of future developments. This text is not simply an updated version of typical parastitology books but takes an integrated approach and explains how the study of parasites requires an understanding of a wide range of other topics from molecular biology and immunology to the interactions of parasites with both their hosts and other pathogens.

Statics and Mechanics of Materials SI Edition

Statics and Mechanics of Materials  SI Edition
Author: Barry J. Goodno,James Gere
Publsiher: Cengage Learning
Total Pages: 896
Release: 2018-02-08
ISBN 10: 9781133364412
ISBN 13: 1133364411
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials SI Edition Book Review:

Master two essential subjects in engineering mechanics -- statics and mechanics of materials -- with the rigorous, complete, and integrated treatment found in STATICS AND MECHANICS OF MATERIALS. This book helps readers establish a strong foundation for further study in mechanics that is essential for mechanical, structural, civil, biomedical, petroleum, nuclear, aeronautical, and aerospace engineers. The authors present numerous practical problems based on real structures, using state-of-the-art graphics, photographs, and detailed drawings of free-body diagrams. All example problems and end-of-chapter problem follow a comprehensive, organized, and systematic Four-Step Problem-Solving Approach to help readers strengthen important problem-solving skills and gain new insight into methods for dissecting and solving problems. The free website also contains nearly 200 FE-type review problems to help prepare for success on the FE Exams. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Palliative Care An Integrated Approach

Palliative Care  An Integrated Approach
Author: Jenny Buckley
Publsiher: John Wiley & Sons
Total Pages: 348
Release: 2008-07-31
ISBN 10: 0470518588
ISBN 13: 9780470518588
Language: EN, FR, DE, ES & NL

Palliative Care An Integrated Approach Book Review:

This evidence-based text brings together the theory and practice of palliative care. It examines at all aspects of palliative care i.e. psycho social, spiritual and physical in a highly practical way. The evidence base for cancer care has been developed within the Hospice Movement over the past 50 years and, in the main, it transfers across to patients dying of diseases other than cancer. The book addresses the palliative needs of any patient with any disease in any care setting, which gives it a generic approach. This is in line with current government directives. Contributions to care and treatment are considered in a multidisciplinary and complementary way.

Mechanical Design of Machine Components

Mechanical Design of Machine Components
Author: Ansel C. Ugural
Publsiher: Taylor & Francis
Total Pages: 953
Release: 2018-09-03
ISBN 10: 1498735401
ISBN 13: 9781498735407
Language: EN, FR, DE, ES & NL

Mechanical Design of Machine Components Book Review:

Analyze and Solve Real-World Machine Design Problems Using SI Units Mechanical Design of Machine Components, Second Edition: SI Version strikes a balance between method and theory, and fills a void in the world of design. Relevant to mechanical and related engineering curricula, the book is useful in college classes, and also serves as a reference for practicing engineers. This book combines the needed engineering mechanics concepts, analysis of various machine elements, design procedures, and the application of numerical and computational tools. It demonstrates the means by which loads are resisted in mechanical components, solves all examples and problems within the book using SI units, and helps readers gain valuable insight into the mechanics and design methods of machine components. The author presents structured, worked examples and problem sets that showcase analysis and design techniques, includes case studies that present different aspects of the same design or analysis problem, and links together a variety of topics in successive chapters. SI units are used exclusively in examples and problems, while some selected tables also show U.S. customary (USCS) units. This book also presumes knowledge of the mechanics of materials and material properties. New in the Second Edition: Presents a study of two entire real-life machines Includes Finite Element Analysis coverage supported by examples and case studies Provides MATLAB solutions of many problem samples and case studies included on the book’s website Offers access to additional information on selected topics that includes website addresses and open-ended web-based problems Class-tested and divided into three sections, this comprehensive book first focuses on the fundamentals and covers the basics of loading, stress, strain, materials, deflection, stiffness, and stability. This includes basic concepts in design and analysis, as well as definitions related to properties of engineering materials. Also discussed are detailed equilibrium and energy methods of analysis for determining stresses and deformations in variously loaded members. The second section deals with fracture mechanics, failure criteria, fatigue phenomena, and surface damage of components. The final section is dedicated to machine component design, briefly covering entire machines. The fundamentals are applied to specific elements such as shafts, bearings, gears, belts, chains, clutches, brakes, and springs.

Statics and Mechanics of Materials

Statics and Mechanics of Materials
Author: Ferdinand Beer,John DeWolf,Jr. Johnston, E. Russell,David Mazurek
Publsiher: McGraw-Hill Education
Total Pages: 736
Release: 2010-01-19
ISBN 10: 9780073380155
ISBN 13: 0073380156
Language: EN, FR, DE, ES & NL

Statics and Mechanics of Materials Book Review:

The approach of the Beer and Johnston texts has been appreciated by hundreds of thousands of students over decades of engineering education. The Statics and Mechanics of Materials text uses this proven methodology in a new book aimed at programs that teach these two subjects together or as a two-semester sequence. Maintaining the proven methodology and pedagogy of the Beer and Johnston series, Statics and Mechanics of Materials combines the theory and application behind these two subjects into one cohesive text. A wealth of problems, Beer and Johnston’s hallmark Sample Problems, and valuable Review and Summary sections at the end of each chapter highlight the key pedagogy of the text.

Basic Clinical Lab Competencies for Respiratory Care An Integrated Approach

Basic Clinical Lab Competencies for Respiratory Care  An Integrated Approach
Author: Gary White
Publsiher: Nelson Education
Total Pages: 706
Release: 2012-01-15
ISBN 10: 1133709664
ISBN 13: 9781133709664
Language: EN, FR, DE, ES & NL

Basic Clinical Lab Competencies for Respiratory Care An Integrated Approach Book Review:

A long time favorite, the fifth edition of BASIC CLINICAL LAB COMPETENCIES FOR RESPIRATORY CARE: AN INTEGRATED APPROACH continues to bring classroom theory to life at the bedside. Known for its integration of theoretical knowledge and practical skills, this text emphasizes the importance of assessment of need, contraindications, hazards/complications, monitoring, and outcomes assessment in respiratory care. Concise, direct, and easy to understand, this fifth edition has been updated to reflect recent advances in the field in order to ensure that students have the knowledge and skills needed to practice the art and the science of respiratory care. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Exam Prep Flash Cards for College Physics With an

Exam Prep Flash Cards for College Physics  With an
Author: Anonim
Publsiher: Anonim
Total Pages: 329
Release:
ISBN 10:
ISBN 13:
Language: EN, FR, DE, ES & NL

Exam Prep Flash Cards for College Physics With an Book Review: