Piping And Pipeline Calculations Manual

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. Updates to major codes and standards such as ASME B31.1 and B31.12 New methods for calculating stress intensification factor (SIF) and seismic activities Risk-based analysis based on API 579, and B31-G Covers the Pipeline Safety Act and the creation of PhMSA

This on-the-job resource is packed with all the formulas, calculations, and practical tips necessary to smoothly move gas or liquids through pipes, assess the feasibility of improving existing pipeline performance, or design new systems. Contents: Water Systems Piping * Fire Protection Piping Systems * Steam Systems Piping * Building Services Piping * Oil Systems Piping * Gas Systems Piping * Process Systems Piping * Cryogenic Systems Piping * Refrigeration Systems Piping * Hazardous Piping Systems * Slurry and Sludge Systems Piping * Wastewater and Stormwater Piping * Plumbing and Piping Systems * Ash Handling Piping Systems * Compressed Air Piping Systems * Compressed Gases and Vacuum Piping Systems * Fuel Gas Distribution Piping Systems

The integrity of a piping system depends on the considerations and principles used in design, construction, and maintenance of the system. Piping systems are made of many components such as pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints. These components can be made in a variety of materials, in different types and sizes, and may be manufactured to common national standards or according a manufacturers proprietary item. This book provides engineers and designers with a ?quick reference guide? to the calculations, codes, and standards. The lack of commentary, or historical perspective, regarding the codes and standards requirements for piping design and construction is an obstacle to the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner who want to provide a safe and economical piping system. An intensive manual, this book will utilize hundreds of calculation and examples based on of 40 years of personal experiences of the author as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. This book is a ?no nonsense? guide to the principle intentions of the codes or standards and provides advice on compliance. After using this book the reader should come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The focus of the book is to enhance participants? understanding and application of the spirit of the code or standard and form a plan for compliance. The book is enhanced by a multitude of calculations to assist in problem solving, directly applying the rules and equations for specific design and operating conditions to illustrate correct applications. Each calculation is based on a specific code. The major codes covered in the book are: American Society of Mechanical Engineers ? B31.3 - 2002 - Process Piping ? B31.8 - 2003 - Gas Transmission and Distribution Piping Systems ? B31.8S - 2001 - 2002 - Managing System Integrity of Gas Pipelines ? B31.4 - 2002 - Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids ? B16.34 - 2004 Valves Flanged, Threaded and Welding End American Petroleum Institute ? API SPEC 6D - Specification for Pipeline Valves. ? API 526 - Flanged Steel Pressure Relief Valves. ? API 527 - Seat Tightness of Pressure Relief Valves R(2002). ? ANSI/API STD 594 - Check Valves: Flanged, Lug, Wafer and Butt-welding. ? API 598 - Valve Inspection and Testing. The book covers American Water Works Association standards where they are applicable. Utilizes hundreds of calculation and examples Guide to the principle intentions of the codes Easy to follow advice on code compliance Directly applies equations for specific design

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. Updates to major codes and standards such as ASME B31.1 and B31.12 New methods for calculating stress intensification factor (SIF) and seismic activities Risk-based analysis based on API 579, and B31-G Covers the Pipeline Safety Act and the creation of PhMSA

Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual’s three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified flow rate and pressure limitations, and calculating the locations and HP of compressor stations and pumping stations on long distance pipelines. Case studies are based on the author’s personal field experiences Component to system level coverage Save time and money designing pipe routes well Design and verify piping systems before going to the field Increase design accuracy and systems effectiveness

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. Back-of-the envelope calculations Checklists for maintenance operations Checklists for environmental compliance Simulations, modeling tools and equipment design Guide for pump and pumping station placement

Now in its sixth edition, Pipeline Rules of Thumb Handbook has been and continues to be the standard resource for any professional in the pipeline industry. A practical and convenient reference, it provides quick solutions to the everyday pipeline problems that the pipeline engineer, contractor, or designer faces. Pipeline Rules of Thumb Handbook assembles hundreds of shortcuts for pipeline construction, design, and engineering. Workable "how-to" methods, handy formulas, correlations, and curves all come together in this one convenient volume. Save valuable time and effort using the thousands of illustrations, photographs, tables, calculations, and formulas available in an easy to use format Updated and revised with new material on project scoping, plastic pipe data, HDPE pipe data, fiberglass pipe, NEC tables, trenching, and much more A book you will use day to day guiding every step of pipeline design and maintenance

Taking a big-picture approach, Piping and Pipeline Engineering: Design, Construction, Maintenance, Integrity, and Repair elucidates the fundamental steps to any successful piping and pipeline engineering project, whether it is routine maintenance or a new multi-million dollar project. The author explores the qualitative details, calculations, and t

In-depth Details on Piping Systems Filled with examples drawn from years of design and field experience, this practical guide offers comprehensive information on piping installation, repair, and rehabilitation. All of the latest codes, standards, and specifications are included. Piping Systems Manual is a hands-on design and engineering resource that explains the reasons behind the designs. You will get full coverage of materials, components, calculations, specifications, safety, and much more. Hundreds of detailed illustrations make it easy to understand the best practices presented in the book. Piping Systems Manual covers: ASME B31 piping codes Specifications and standards Materials of construction Fittings Valves and appurtenances Pipe supports Drafting practice Pressure drop calculations Piping project anatomy Field work and start-up What goes wrong Special services Infrastructure Strategies for remote locations

Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The potential for growth and expansion of the industry is huge. The 3rd Edition of the Valves, Piping and Pipelines Handbook salutes these developments and provides the engineer with a timely first source of reference for the selection and application of Valves and Pipes.

In your day-to-day planning, design, operation, and optimization of pipelines, wading through complex formulas and theories is not the way to get the job done. Gas Pipeline Hydraulics acts as a quick-reference guide to formulas, codes, and standards encountered in the gas industry. Based on the author's 30 years of experience in manufacturing and the oil and gas industry, the book presents a step-by-step introduction to the concepts in a practical approach illustrated by real-world examples, case studies, and a wealth of problems at the end of each chapter. Avoiding overly complex equations and theorems, Gas Pipeline Hydraulics demonstrates the calculation of pressure drop using various commonly accepted formulas. The author extends this discussion to determine total pressure required under various configurations, the necessity of pressure regulators and control valves, the comparative pros and cons of adding compressor stations versus pipe loops, mechanical strength of the pipeline, and thermal hydraulic analysis. He also introduces transient pressure analysis along with references for more in-depth study. The text concludes with the economic aspects of pipeline systems. Containing valuable appendices that provide conversions from USCS to SI units, tables of properties of natural gas, commonly used pipe sizes, and allowable internal and hydrotest pressures, this is the most easy-to-use, hands-on reference for gas pipelines available.

This book covers liquid pipeline hydraulics as it applies to transportation of liquids through pipelines in a single phase steady state environment. It will serve as a practical handbook for engineers, technicians and others involved in design and operation of pipelines transporting liquids. Currently, existing books on the subject are mathematically rigorous, theoretical and lack practical applications. Using this book, engineers can better understand and apply the principles of hydraulics to their daily work in the pipeline industry without resorting to complicated formulas and theorems. Numerous examples from the author’s real life experience are included to illustrate application of pipeline hydraulics.

Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe design in the petrochemical industry. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters discuss the customization of AutoCAD, AutoLISP and details on the use of third-party software to create 3-D models from which elevation, section and isometric drawings are extracted including bills of material. Covers drafting and design fundamentals to detailed advice on the development of piping drawings using manual and AutoCAD techniques 3-D model images provide an uncommon opportunity to visualize an entire piping facility Each chapter includes exercises and questions designed for review and practice

Instant answers to your toughest questions on piping components and systems! It's impossible to know all the answers when piping questions are on the table - the field is just too broad. That's why even the most experienced engineers turn to Piping Handbook, edited by Mohinder L. Nayyar, with contribution from top experts in the field. The Handbook's 43 chapters--14 of them new to this edition--and 9 new appendices provide, in one place, everything you need to work with any type of piping, in any type of piping system: design layout selection of materials fabrication and components operation installation maintenance This world-class reference is packed with a comprehensive array of analytical tools, and illustrated with fully-worked-out examples and case histories. Thoroughly updated, this seventh edition features revised and new information on design practices, materials, practical applications and industry codes and standards--plus every calculation you need to do the job.

Pipeline Engineering ebook Collection contains 6 of our best-selling titles, providing the ultimate reference for every pipeline professional’s library. Get access to over 3000 pages of reference material, at a fraction of the price of the hard-copy books. This CD contains the complete ebooks of the following 6 titles: McAllister, Pipeline Rules of Thumb 6th Edition, 9780750678520 Muhlbauer, Pipeline Risk Management Manual 3rd Edition, 9780750675796 Parker, Pipeline Corrosion & Cathodic Protection 3rd Edition, 9780872011496 Escoe, Piping & Pipeline Assessment Guide V1, 9780750678803 Parisher, Pipe Drafting & Design 2nd Edition, 9780750674393 Farshad, Plastic Pipe Systems: Failure Investigation and Diagnosis, 9781856174961 *Six fully searchable titles on one CD providing instant access to the ULTIMATE library of engineering materials for pipeline professionals *3000 pages of practical and theoretical pipeline information in one portable package. * Incredible value at a fraction of the cost of the print books

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. Gain expert coverage of international design codes Understand how to design pipelines and risers for today's deepwater oil and gas Master critical equipment such as subsea control systems and pressure piping

An up-to-date and practical reference book on piping engineering and stress analysis, this book emphasizes three main concepts: using engineering common sense to foresee a potential piping stress problem, performing the stress analysis to confirm the problem, and lastly, optimizing the design to solve the problem. Systematically, the book proceeds from basic piping flexibility analyses, springer hanger selections, and expansion joint applications, to vibration stress evaluations and general dynamic analyses. Emphasis is placed on the interface with connecting equipment such as vessels, tanks, heaters, turbines, pumps and compressors. Chapters dealing with discontinuity stresses, special thermal problems and cross-country pipelines are also included. The book is ideal for piping engineers, piping designers, plant engineers, and mechanical engineers working in the power, petroleum refining, chemical, food processing, and pharmaceutical industries. It will also serve as a reference for engineers working in building and transportation services. It can be used as an advance text for graduate students in these fields.

This reference provides reliable piping estimating data including installation of pneumatic mechanical instrumentation used in monitoring various process systems. This new edition has been expanded and updated to include installation of pneumatic mechanical instrumentation, which is used in monitoring various process systems.

From development of the initial requirements to final drawings used in construction, this authoritative reference for the design and drafting of industrial piping systems provides a step-by-step guide to piping design. Created as an in-depth resource for professionals, this piping bible is as valuable in the field as it is in the office or the classroom. Among the topics covered in this encyclopedic survey are techniques of piping design, the assembly of piping from components, processes for connecting piping to equipment, office organization, methods to translate concepts into finished designs, and terms and abbreviations concerned. An expansive selection of charts and tables presents a wide array of information—frequently used data; factors for establishing pipeways width; spacing between pipes with and without flanges and for “jumpovers” and “runarounds;” principal dimensions and weights for key components; conversion for customary and metric units; direct-reading metric conversion tables for dimensions and data; and a metric supplement with principal dimensional data in millimeters—handily organized for quick reference.