Multiphase Flow Metering

Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors’ strong background on multiphase flow and by practical examples. These are based on the authors’ direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students. * Written by leading scholars and industry experts of international standing * Includes strong coverage of the theoretical background, yet also provides practical examples and current developments * Provides practical reference for professionals, students and academics

Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors' strong background on multiphase flow and by practical examples. These are based on the authors' direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students. * Written by leading scholars and industry experts of international standing * Includes strong coverage of the theoretical background, yet also provides practical examples and current developments * Provides practical reference for professionals, students and academics

Plant Flow Measurement and Control Handbook is a comprehensive reference source for practicing engineers in the field of instrumentation and controls. It covers many practical topics, such as installation, maintenance and potential issues, giving an overview of available techniques, along with recommendations for application. In addition, it covers available flow sensors, such as automation and control. The author brings his 35 years of experience in working in instrumentation and control within the industry to this title with a focus on fluid flow measurement, its importance in plant design and the appropriate control of processes. The book provides a good balance between practical issues and theory and is fully supported with industry case studies and a high level of illustrations to assist learning. It is unique in its coverage of multiphase flow, solid flow, process connection to the plant, flow computation and control. Readers will not only further understand design, but they will also further comprehend integration tactics that can be applied to the plant through a step-by-step design process that goes from installation to operation. Provides specification sheets, engineering drawings, calibration procedures and installation practices for each type of measurement Presents the correct flow meter that is suitable for a particular application Includes a selection table and step-by-step guide to help users make the best decision Cover examples and applications from engineering practice that will aid in understanding and application

The Concise Industrial Flow Measurement Handbook: A Definitive Practical Guide covers the complete range of modern flow measuring technologies and represents 40 years of experiential knowledge within a wide variety of industries, and from more than 5000 technicians and engineers who have attended the author’s workshops. This book covers all the current technologies in flow measurement, including high accuracy Coriolis, ultrasonic custody transfer, and high accuracy magnetic flowmeters. The book also discusses flow proving and limitations of different proving methods. This volume contains over 300 explanatory drawings and graphs and is presented in a form suitable for both the beginner, with no prior knowledge of the subject, as well as the more advanced specialist. This book is aimed at professionals in the field, including chemical engineers, process engineers, instrumentation and control engineers, and mechanical engineers.

This volume is an information-packed reference for engineers on flow measuring techniques and instruments. Striking a balance between laboratory ideal and the realities of field experience, this handy tool provides a wealth of practical advice on the design, operation, and performance of a broad range of flowmeters. The book begins with a brief review of fluid mechanics principles, how to select a flowmeter, and a variety of calibration methods. Each of the following chapters is devoted to a class of flowmeters and includes detailed information on design, applications, installation, calibration, operation, and advantages and disadvantages. Among the flowmeters discussed are orifice plate meters, venturi meter and standard nozzles, critical flow venturi nozzles, positive displacement flowmeters, turbine and related flowmeters, vortex shedding and fluidic flowmeters, electromagnetic flowmeters, ultrasonic flowmeters, and coriolis flowmeters. Also covered are mass flow measurements using multiple sensors, thermal flowmeters, angular momentum devices, probes, and modern control systems. Many chapters conclude with an appendix on the theory behind the techniques discussed. It will be a valuable reference for practicing engineers and will also be of interest to researchers in mechanical, chemical and aerospace engineering.

These essays present the latest international research results in the field of multiphase flow and heat transfer. They are based on papers presented at the "Second International Symposium on Multiphase Flow and Heat Transfer" conducted in China in 1989.

Handbook of Multiphase Flow Assurance allows readers to progress in their understanding of basic phenomena and complex operating challenges. The book starts with the fundamentals, but then goes on to discuss phase behavior, fluid sampling, fluid flow properties and fluid characterization. It also covers flow assurance impedance, deliverability, stability and integrity issues, as well as hydraulic, thermal and risk analysis. The inclusion of case studies and references helps provide an industrial focus and practical application that makes the book a novel resource for flow assurance management and an introductory reference for engineers just entering the field of flow assurance. Starts with flow assurance fundamentals, but also includes more complex operating challenges Brings together cross-disciplinary discussions and solutions of flow assurance in a single text Offers case studies and reference guidelines for practical applications

The oil and gas industry's goal of developing high performing multiphase flow metering systems capable of reducing costs in the exploitation of marginal oil and gas reserves, especially in remote environments, cannot be over emphasised. Development of a cost-effective multiphase flow meter to determine the individual phase flow rates of oil, water and gas was experimentally investigated by means of low cost, simple and non-intrusive commercially available sensors. Features from absolute pressure, differential pressure (axial), gamma densitometer, conductivity and capacitance meters, in combination with pattern recognition techniques were used to detect shifts in flow conditions, such as flow structure, pressure and salinity changes and measured multiphase flow parameters simultaneously without the need for preconditioning or prior knowledge of either phase. The experiments were carried out at the National Engineering Laboratory (NEL) Multiphase facility. Data was sampled at 250 Hz across a wide spectrum of flow conditions. Fluids used were nitrogen gas, oil (Forties and Beryl crude oil - D80, 33o API gravity) and water (salinity levels of 50 and 100 g/l MgSO4). The sensor spool piece was horizontally mounted on a 4-inch (102mm) pipe, and the database was obtained from two different locations on the flow loop. The ability to learn from 'experience' is a feature of neural networks. The use of neural networks allows re-calibration of the measuring system on line through a retraining process when new information becomes available. Some benefits and capabilities of intelligent multiphase flow systems include: · Reduction in the physical size of installations. · Sensor fusion by merging the operating envelopes of different sensors employed provided even better results. · Monitoring of flow conditions, not just flow rate but also composition of components. · Using conventional sensors within the system will present the industry with a much lower cost multiphase meter, and.

This book describes the basic principles of electromagnetic induction measurements and consolidates the outcomes of recent research. It encompasses pipeline electromagnetic flow meters, electromagnetic flow meters, multiphase flow electromagnetic flowmeters and flow field of electromagnetic induction reconstruction. Though theoretical in nature it does draw on experimental data and includes new research findings, especially in the areas of multiphase flow and flow reconstruction. With a focus on theory and computation in flow measurement by electromagnetic induction including traditional flowmeters in closed conduits, velocity probe, two-phase flow, velocity reconstruction and dry calibration it will be an invaluable resource for researchers and practising engineers. The book uses MATLAB(R) to introduce efficient numerical methods to model and simulate flows, sensor construction and geometry, and the effect of pipe materials. Key Features A comprehensive review on all issues to do with EM flowmeters Includes latest research directions and findings Accompanying MATLAB(R) code A reference text for students, researchers, users and designers Industrial and commercial interest

A focus on methods of measurement and options for engineers and scientists performing research and evaluation of particle-fluid flow systems. Improved instrumentation for measurement in this field is an essential element in the progress of research and engineering of multi-phase flow systems. Some of the most original and productive research specialists in the field of particle-fluid flow systems are assembled in this book, which is an important and current reference volume.--[Source inconnue].

The research included in this volume focuses on using synergies between experimental and computational techniques to gain a better understanding of all classes of multiphase and complex flow. The included papers illustrate the close interaction between numerical modellers and researchers working to gradually resolve the many outstanding issues in our understanding of multiphase flow. Recently multiphase fluid dynamics have generated a great deal of attention, leading to many notable advances in experimental, analytical and numerical studies. Progress in numerical methods has permitted the solution of many practical problems, helping to improve our understanding of the physics involved. Multiphase flows are found in all areas of technology and the range of related problems of interest is vast, including astrophysics, biology, geophysics, atmospheric process, and many areas of engineering.

Publisher Description

This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.

"Multiphase flow and heat transfer have found a wide range of applications in several engineering and science fields such as mechanical engineering, chemical and petrochemical engineering, nuclear engineering, energy engineering, material engineering, ocea"

Annotation This book presents the fundamentals of multiphase production with regard to flow simulations in multiphase pipelines, multiphase pumping and multiphase metering. It gives a large range of information on approaches and technologies which can be used today. It is designed for engineers involved in field development, but also for petroleum engineering students.

Multiphase flows are found in all areas of technology, at all length scales and flow regimes and can involve compressible or incompressible linear or nonlinear, fluids. However, although they are ubiquitous, multiphase flows continue to be one of the most challenging areas of computational mechanics, with numerous problems as yet unsolved. Advanced computational and experimental methods are often required to solve the equations that describe such complex problems. The many challenges that must be faced in solving them include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. It is important to validate models, which calls for the use of expensive and difficult experimental techniques.This book presents contributions on the latest research in the techniques for solving multiphase flow problems, presented at the seventh in a biennial series of conferences on the subject that began in 2001. Featured topics include: Flow in porous media; Turbulent flow; Multiphase flow simulation; Image processing; Heat transfer; Atomization; Interface behaviour; Oil and gas applications; Experimental measurements; Energy applications; Biological flows; Micro and macro fluids; Compressible flows.

This is a comprehensive, practical, easy-to-read book on process control, covering some of the most important topics in the petrochemical process industry, including Fieldbus, Multiphase Flow Metering, and other recently developed control systems. A compilation of all the best instrumentation and control techniques used in industry today Interesting theoretical content as well as practical topics on planning, integration and application Includes the latest on Fieldbus, Profibus and Multiphase Flow Metering.

There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications Avoids theory and focuses on presentation of practical data for the novice and veteran engineer Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications