Metal Oxide Powder Technologies

Metal Oxide Powder Technologies
Author: Yarub Al-Douri
Publsiher: Elsevier
Total Pages: 446
Release: 2020-06-02
ISBN 10: 0128175060
ISBN 13: 9780128175064
Language: EN, FR, DE, ES & NL

Metal Oxide Powder Technologies Book Review:

Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications reviews the fundamentals, processing methods and applications of this key materials system. Topics addressed comprehensively cover chemical and physical properties, synthesis, preparation, both accepted and novel processing methods, modeling and simulation. The book provides fundamental information on the key properties that impact performance, such as particle size and crystal structure, along with methods to measure, analyze and evaluate. Finally, important applications are covered, including biomedical, energy, electronics and materials applications. Provides a comprehensive overview of key topics both on the theoretical side and the experimental Discusses important properties that impact metal oxide performance, processing methods (both novel and accepted), and important applications Reviews the most relevant applications, such as biomedical, energy, electronics and materials applications

Metal Oxides in Energy Technologies

Metal Oxides in Energy Technologies
Author: Yuping Wu
Publsiher: Elsevier
Total Pages: 448
Release: 2018-10-05
ISBN 10: 0128104163
ISBN 13: 9780128104163
Language: EN, FR, DE, ES & NL

Metal Oxides in Energy Technologies Book Review:

Metal Oxides in Energy Technologies provides, for the first time, a look at the wide range of energy applications of metal oxides. Topics covered include metal oxides materials and their applications in batteries, supercapacitors, fuel cells, solar cells, supercapacitors, and much more. The book is written by an experienced author of over 240 papers in peer-reviewed journals who was also been recognized as one of Thomson Reuter’s “World’s Most Influential Scientific Minds in 2015. This book presents a unique work that is ideal for academic researchers and engineers. Presents an authoritative overview on metal oxides in energy technologies as written by an expert author who has published extensively in the area Offers up-to-date coverage of a large, rapidly growing and complex literature Focuses on applications, making it an ideal resource for those who want to apply this knowledge in industry

Powder Technology Handbook Fourth Edition

Powder Technology Handbook  Fourth Edition
Author: Ko Higashitani,Hisao Makino,Shuji Matsusaka
Publsiher: CRC Press
Total Pages: 647
Release: 2019-10-16
ISBN 10: 1351730592
ISBN 13: 9781351730594
Language: EN, FR, DE, ES & NL

Powder Technology Handbook Fourth Edition Book Review:

The Fourth Edition of Powder Technology Handbook continues to serve as the comprehensive guide to powder technology and the fundamental engineering processes of particulate technology, while incorporating significant advances in the field in the decade since publication of the previous edition. The handbook offers a well-rounded perspective on powder technologies in gas and liquid phases that extends from particles and powders to powder beds and from basic problems to actual applications. This new edition features fully updated and new chapters written by a team of internationally distinguished contributors. All content has been updated and new sections added on. Powder Technology Handbook provides methodologies of powder and particle handling technology essential to scientific researchers and practical industrial engineers. It contains contemporary and comprehensive information on powder and particle handling technology that is extremely useful not only to newcomers but also to experienced engineers and researchers in the field of powder and particle science and technology.

Metal Oxides for Non volatile Memory

Metal Oxides for Non volatile Memory
Author: Panagiotis Dimitrakis,Ilia Valov,Stefan Tappertzhofen
Publsiher: Elsevier
Total Pages: 536
Release: 2022-03-10
ISBN 10: 0128146303
ISBN 13: 9780128146309
Language: EN, FR, DE, ES & NL

Metal Oxides for Non volatile Memory Book Review:

Metal Oxides for Non-volatile Memory: Materials, Technology and Applications covers the technology and applications of metal oxides (MOx) in non-volatile memory (NVM) technology. The book addresses all types of NVMs, including floating-gate memories, 3-D memories, charge-trapping memories, quantum-dot memories, resistance switching memories and memristors, Mott memories and transparent memories. Applications of MOx in DRAM technology where they play a crucial role to the DRAM evolution are also addressed. The book offers a broad scope, encompassing discussions of materials properties, deposition methods, design and fabrication, and circuit and system level applications of metal oxides to non-volatile memory. Finally, the book addresses one of the most promising materials that may lead to a solution to the challenges in chip size and capacity for memory technologies, particular for mobile applications and embedded systems. Systematically covers metal oxides materials and their properties with memory technology applications, including floating-gate memory, 3-D memory, memristors, and much more Provides an overview on the most relevant deposition methods, including sputtering, CVD, ALD and MBE Discusses the design and fabrication of metal oxides for wide breadth of non-volatile memory applications from 3-D flash technology, transparent memory and DRAM technology

Gas Sensors Based on Conducting Metal Oxides

Gas Sensors Based on Conducting Metal Oxides
Author: Nicolae Barsan,Klaus Schierbaum
Publsiher: Elsevier
Total Pages: 292
Release: 2018-10-17
ISBN 10: 0128112255
ISBN 13: 9780128112250
Language: EN, FR, DE, ES & NL

Gas Sensors Based on Conducting Metal Oxides Book Review:

Gas Sensors Based on Conducting Metal Oxides: Basic Understanding, Technology and Applications focuses on two distinct types of gas sensors based on conducting metal oxides. Ion conduction, applied in so-called solid-state electrolytic sensors for one, and electronic conduction used in semiconductivity gas sensors for the other. The well-known λ–probe, a key component to optimize combustion in car engines, is an example of the former type, and the in-cabin car air-quality control SnO2 and WO2 sensor array stands for the semiconductivity type. Chapters cover basic aspects of functioning principles and describe the technologies and challenges of present and future sensors. Provides reader background and context on sensors, principles, fabrication and applications Includes chapters on specific technological applications, such as exhaust sensors, environmental sensors, explosive gases alarms and more Presents a structured presentation that allows for quick reference of vital information

Metal Oxide Carbon Hybrid Materials

Metal Oxide Carbon Hybrid Materials
Author: Muhammad Akram Chaudhry,Rafaqat Hussain,Faheem K. Butt
Publsiher: Elsevier
Total Pages: 588
Release: 2022-03-20
ISBN 10: 0128227087
ISBN 13: 9780128227084
Language: EN, FR, DE, ES & NL

Metal Oxide Carbon Hybrid Materials Book Review:

Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications reviews the advances in the fabrication and application of metal oxide–carbon-based nanocomposite materials. Their unique properties make them ideal materials for gas-sensing, photonics, catalysis, opto-electronic, and energy-storage applications. In the first section, the historical background to the hybrid materials based on metal oxide–carbon and the hybridized metal oxide composites is provided. It also highlights several popular methods for the preparation of metal oxide–carbon composites through solid-state or solution-phase reactions, and extensively discusses the materials’ properties. Fossil fuels and renewable energy sources cannot meet the ever-increasing energy demands of an industrialized and technology-driven global society. Therefore, the role of metal oxide–carbon composites in energy generation, hydrogen production, and storage devices, such as rechargeable batteries and supercapacitors, is of extreme importance. These problems are discussed in in the second section of the book. Rapid industrialization has resulted in serious environmental issues which in turn have caused serious health problems that require the immediate attention of researchers. In the third section, the use of metal oxide–carbon composites in water purification, photodegradation of industrial contaminants, and biomedical applications that can help to clean the environment and provide better healthcare solutions is described. The final section is devoted to the consideration of problems associated with the development of sensors for various applications. Numerous studies performed in this area have shown that the use of composites can significantly improve the operating parameters of such devices. Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications presents a comprehensive review of the science related to metal oxide–carbon composites and how researchers are utilizing these materials to provide solutions to a large array of problems. Reviews the fundamental properties and fabrication methods of metal-oxide–carbon composites Discusses applications in energy, including energy generation, hydrogen production and storage, rechargeable batteries, and supercapacitors Includes current and emerging applications in environmental remediation and sensing

Metal Oxide Based Nanofibers and Their Applications

Metal Oxide Based Nanofibers and Their Applications
Author: Vincenzo Esposito,Debora Marani
Publsiher: Elsevier
Total Pages: 460
Release: 2021-10-25
ISBN 10: 0128209070
ISBN 13: 9780128209073
Language: EN, FR, DE, ES & NL

Metal Oxide Based Nanofibers and Their Applications Book Review:

Metal Oxide-based Nanofibers and their Applications provides an in-depth overview on developments surrounding the synthesis, characterization properties, and applications achieved by scientific leaders in the area. Sections deal with the theoretical and experimental aspects of the synthesis and methodologies to control microstructure, composition and shape of the nanofibrous metal oxides, review the applications of metal oxide nanofibers in diverse technologies, with special focus on the relation between the structural, morphological and compositional features of the nanofibers, cover applications of metal oxide nanofibers in the fields of sensing (biosensing, gas sensing), and consider biomedical and cleaning technologies. Lastly, a final section covers their application in energy generation and storage technologies (e. g. piezoelectric, solar cells, solid oxide fuel cells, lithium-ion batteries, supercapacitors, and hydrogen storage are reviewed. Reviews electrospinning methods for the synthesis and design of nanocomposites and hybrid metal oxide nanofibers Discusses applications of metal oxide nanofibers in sensing, biomedical fields, cleaning technologies, and energy Emphasizes the structural, morphological and compositional properties of nanofibers and their effect on device performance

Renewable Polymers and Polymer Metal Oxide Composites

Renewable Polymers and Polymer Metal Oxide Composites
Author: Sajjad Haider,Adnan Haider
Publsiher: Elsevier
Total Pages: 514
Release: 2022-03-31
ISBN 10: 0323852963
ISBN 13: 9780323852968
Language: EN, FR, DE, ES & NL

Renewable Polymers and Polymer Metal Oxide Composites Book Review:

Renewable Polymers and Polymer-Metal Oxide Composites: Synthesis, Properties, and Applications serves as a reference on the key concepts of the advances of polymer-oxide composites. The book reviews knowledge on polymer-composite theory, properties, structure, synthesis, and their characterization and applications. There is an emphasis on coupling metal oxides with polymers from renewable sources. Also, the latest advances in the relationship between the microstructure of the composites and the resulting improvement of the material’s properties and performance are covered. The applications addressed include desalination, tissue engineering, energy storage, hybrid energy systems, food, and agriculture. This book is suitable for early-career researchers in academia and R&D in industry who are working in the disciplines of materials science, engineering, chemistry and physics. Provides basic principles, theory and synthetic methods of composite materials, polymer composites and metal oxides Reviews the latest advances in polymer-oxide-based applications in medicine, water treatment, energy and sensing Discusses materials from renewable resources, including lifecycle assessment, economic aspects and potential application in tissue engineering, photovoltaics and food packaging

Metal Oxides for Biomedical and Biosensor Applications

Metal Oxides for Biomedical and Biosensor Applications
Author: Kunal Mondal,Ghenadii Korotcenkov
Publsiher: Elsevier
Total Pages: 580
Release: 2021-12-04
ISBN 10: 0128230584
ISBN 13: 9780128230589
Language: EN, FR, DE, ES & NL

Metal Oxides for Biomedical and Biosensor Applications Book Review:

Metal Oxides for Biomedical and Biosensor Applications gives an in-depth overview of the emerging research in the biomedical and biosensing applications of metal oxides, including optimization of their surface and bulk properties. Sections cover biomedical applications of metal oxides for use in cell cultures, antibacterial and antimicrobial treatments, dental applications, drug delivery, cancer therapy, immunotherapy, photothermal therapy, tissue engineering, and metal oxide-based biosensor development. As advanced and biofunctionalized nano/micro structured metal oxides are finding applications in microfluidics, optical sensors, electrochemical sensors, DNA-based biosensing, imaging, diagnosis and analysis, this book provides a comprehensive update on the topic. Additional sections cover research challenges, technology limitations, and future trends in metal oxides and their composites regarding their usage in biomedical applications. Includes an overview of the important applications of metal oxides for biomedical and biosensing technologies Addresses the relationship between material properties, such as structure, morphology, composition and performance Reviews the design and fabrication strategies of metal oxides for use in medical and biosensing applications

Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries

Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells  Electrolyzers  and Metal Air Batteries
Author: Teko W. Napporn,Yaovi Holade
Publsiher: Elsevier
Total Pages: 292
Release: 2021-01-30
ISBN 10: 0128184973
ISBN 13: 9780128184974
Language: EN, FR, DE, ES & NL

Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries Book Review:

Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment. Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial. The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering. Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications

Metal Oxides and Related Solids for Electrocatalytic Water Splitting

Metal Oxides and Related Solids for Electrocatalytic Water Splitting
Author: Junlei Qi
Publsiher: Elsevier
Total Pages: 404
Release: 2022-05-16
ISBN 10: 0323898068
ISBN 13: 9780323898065
Language: EN, FR, DE, ES & NL

Metal Oxides and Related Solids for Electrocatalytic Water Splitting Book Review:

Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection

Colloidal Metal Oxide Nanoparticles

Colloidal Metal Oxide Nanoparticles
Author: Anonim
Publsiher: Elsevier
Total Pages: 608
Release: 2019-10-16
ISBN 10: 0128133589
ISBN 13: 9780128133583
Language: EN, FR, DE, ES & NL

Colloidal Metal Oxide Nanoparticles Book Review:

Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization

Solution Processed Metal Oxide Thin Films for Electronic Applications

Solution Processed Metal Oxide Thin Films for Electronic Applications
Author: Zheng Cui
Publsiher: Elsevier
Total Pages: 180
Release: 2020-06-11
ISBN 10: 0128149310
ISBN 13: 9780128149317
Language: EN, FR, DE, ES & NL

Solution Processed Metal Oxide Thin Films for Electronic Applications Book Review:

Solution Processed Metal Oxide Thin Films for Electronic Applications discusses the fundamentals of solution processing materials chemistry techniques as they are applied to metal oxide materials systems for key device applications. The book introduces basic information (materials properties, materials synthesis, barriers), discusses ink formulation and solution processing methods, including sol-gel processing, surface functionalization aspects, and presents a comprehensive accounting on the electronic applications of solution processed metal oxide films, including thin film transistors, photovoltaic cells and other electronics devices and circuits. This is an important reference for those interested in oxide electronics, printed electronics, flexible electronics and large-area electronics. Provides in-depth information on solution processing fundamentals, techniques, considerations and barriers combined with key device applications Reviews important device applications, including transistors, light-emitting diodes, and photovoltaic cells Includes an overview of metal oxide materials systems (semiconductors, nanomaterials and thin films), addressing materials synthesis, properties, limitations and surface aspects

Metal Oxides in Nanocomposite Based Electrochemical Sensors for Toxic Chemicals

Metal Oxides in Nanocomposite Based Electrochemical Sensors for Toxic Chemicals
Author: A. Pandikumar,Perumal Rameshkumar
Publsiher: Elsevier
Total Pages: 372
Release: 2021-04-21
ISBN 10: 0128209399
ISBN 13: 9780128209394
Language: EN, FR, DE, ES & NL

Metal Oxides in Nanocomposite Based Electrochemical Sensors for Toxic Chemicals Book Review:

Metal oxide nanomaterials exhibit interesting electrical and photochemical properties because of their size, stability, and high surface area that render them as great choices in fabricating alternative electrode materials for electrochemical energy storage and sensor applications. The hybridization of metal oxides with other materials lead to the improvement in electrical conductivity, stability, and electron transfer kinetics during the electrocatalytic reactions. These key factors result in greater sensitivity of the sensor materials towards the analyte molecules. This book reviews the electrochemical determination of a variety of toxic chemical contaminants using metal oxide-based nanocomposite materials. Ultrasensitive and selective detection of toxic chemical contaminants is important and demanding, especially for monitoring and controlling environmental pollution. In recent years, metal oxide-based nanocomposite materials have shown high potential in the electrochemical detection of heavy metals, inorganic anions, phenolic compounds, pesticides, and chemical warfare reagents. Metal Oxides in Nanocomposite-Based Electrochemical Sensors for Toxic Chemicals comprehensively reviews this topic. In addition to the instrumental simplicity, the electrochemical methods show the improved sensor performance through the synergetic effect of metal oxide and other electroactive nanomaterial present in the nanocomposite. Thus, detailed information on the electrochemical sensing of toxic chemical contaminants using metal oxide-based nanomaterials are discussed. The recent progress in developing electrochemical sensors using metal oxide-based nanocomposite materials and perspectives on future opportunities in sensor research and development are addressed in the book. Introduces the fundamentals of electrochemical sensors and fabrication of metal oxide sensors of toxic chemicals Reviews binary, doped, metal oxide-metal, metal oxide-carbon, metal oxide-polymer, metal-boron nitride, metal oxide-clay, and metal oxide- MOF electrodes Systematically addresses the fabrication, synthesis, performance, mechanisms, detection limits, sensitivity, advantages and limitations and future perspectives of a wide range of metal oxide-based electrochemical sensors

Gallium Oxide

Gallium Oxide
Author: Stephen Pearton,Fan Ren,Michael Mastro
Publsiher: Elsevier
Total Pages: 507
Release: 2018-10-15
ISBN 10: 0128145226
ISBN 13: 9780128145227
Language: EN, FR, DE, ES & NL

Gallium Oxide Book Review:

Gallium Oxide: Technology, Devices and Applications discusses the wide bandgap semiconductor and its promising applications in power electronics, solar blind UV detectors, and in extreme environment electronics. It also covers the fundamental science of gallium oxide, providing an in-depth look at the most relevant properties of this materials system. High quality bulk Ga2O3 is now commercially available from several sources and n-type epi structures are also coming onto the market. As researchers are focused on creating new complex structures, the book addresses the latest processing and synthesis methods. Chapters are designed to give readers a complete picture of the Ga2O3 field and the area of devices based on Ga2O3, from their theoretical simulation, to fabrication and application. Provides an overview of the advantages of the gallium oxide materials system, the advances in in bulk and epitaxial crystal growth, device design and processing Reviews the most relevant applications, including photodetectors, FETs, FINFETs, MOSFETs, sensors, catalytic applications, and more Addresses materials properties, including structural, mechanical, electrical, optical, surface and contact

Handbook of Humidity Measurement Volume 3

Handbook of Humidity Measurement  Volume 3
Author: Ghenadii Korotcenkov
Publsiher: CRC Press
Total Pages: 482
Release: 2020-01-24
ISBN 10: 1351056492
ISBN 13: 9781351056496
Language: EN, FR, DE, ES & NL

Handbook of Humidity Measurement Volume 3 Book Review:

Because of unique water properties, humidity affects materials and many living organisms, including humans. Humidity control is important in various fields, from production management to creating a comfortable living environment. The range of materials that can be used in the development of humidity sensors is very broad, and the third volume of the Handbook of Humidity Measurement offers an analysis on various humidity-sensitive materials and sensor technologies used in the fabrication of humidity sensors and methods acceptable for their testing. Additional features include:  numerous strategies for the fabrication and characterization of humidity-sensitive materials and sensing structures used in sensor applications,  methods and properties to develop smaller, cheaper, more robust, and accurate devices with better sensitivity and stability,  a guide to sensor selection and an overview of the humidity sensor market, and  new technology solutions for integration, miniaturization, and specificity of the humidity sensor calibration. Handbook of Humidity Measurement, Volume 3: Sensing Materials and Technologies provides valuable information for practicing engineers, measurement experts, laboratory technicians, project managers in industries and national laboratories, and university students and professors interested in solutions to humidity measurement tasks. Despite the fact that this book is devoted to the humidity sensors, it can be used as a basis for understanding fundamentals of any gas sensor operation and development.

Nanostructured Zinc Oxide

Nanostructured Zinc Oxide
Author: Kamlendra Awasthi
Publsiher: Elsevier
Total Pages: 780
Release: 2021-08-10
ISBN 10: 0128189010
ISBN 13: 9780128189016
Language: EN, FR, DE, ES & NL

Nanostructured Zinc Oxide Book Review:

Nanostructured Zinc Oxide covers the various routes for the synthesis of different types of nanostructured zinc oxide including; 1D (nanorods, nanowires etc.), 2D and 3D (nanosheets, nanoparticles, nanospheres etc.). This comprehensive overview provides readers with a clear understanding of the various parameters controlling morphologies. The book also reviews key properties of ZnO including optical, electronic, thermal, piezoelectric and surface properties and techniques in order to tailor key properties. There is a large emphasis in the book on ZnO nanostructures and their role in optoelectronics. ZnO is very interesting and widely investigated material for a number of applications. This book presents up-to-date information about the ZnO nanostructures-based applications such as gas sensing, pH sensing, photocatalysis, antibacterial activity, drug delivery, and electrodes for optoelectronics. Reviews methods to synthesize, tailor, and characterize 1D, 2D, and 3D zinc oxide nanostructured materials Discusses key properties of zinc oxide nanostructured materials including optical, electronic, thermal, piezoelectric, and surface properties Addresses most relevant zinc oxide applications in optoelectronics such as light-emitting diodes, solar cells, and sensors

Cerium Oxide CeO2 Synthesis Properties and Applications

Cerium Oxide  CeO2   Synthesis  Properties and Applications
Author: Salvatore Scire,Leonardo Palmisano
Publsiher: Elsevier
Total Pages: 402
Release: 2019-08-21
ISBN 10: 0128156627
ISBN 13: 9780128156629
Language: EN, FR, DE, ES & NL

Cerium Oxide CeO2 Synthesis Properties and Applications Book Review:

Cerium Oxide (CeO2): Synthesis, Properties and Applications provides an updated and comprehensive account of the research in the field of cerium oxide based materials. The book is divided into three main blocks that deal with its properties, synthesis and applications. Special attention is devoted to the growing number of applications of ceria based materials, including their usage in industrial and environmental catalysis and photocatalysis, energy production and storage, sensors, cosmetics, radioprotection, glass technology, pigments, stainless steel and toxicology. A brief historical introduction gives users background, and a final chapter addresses future perspectives and outlooks to stimulate future research. The book is intended for a wide audience, including students, academics and industrial researchers working in materials science, chemistry and physics. Addresses a wide range of applications of ceria-based materials, including catalysis, energy production and storage, sensors, cosmetics and toxicology Provides the fundamentals of ceria-based materials, including synthesis methods, materials properties, toxicology and surface chemistry Includes nanostructured ceria-based materials and a discussion of future prospects and outlooks

Tin Oxide Materials

Tin Oxide Materials
Author: Marcelo Ornaghi Orlandi
Publsiher: Elsevier
Total Pages: 666
Release: 2019-10-05
ISBN 10: 0128162791
ISBN 13: 9780128162798
Language: EN, FR, DE, ES & NL

Tin Oxide Materials Book Review:

Tin Oxide Materials: Synthesis, Properties, and Applications discusses the latest in metal oxides, an emerging area in electronic materials. As more is learned about this important materials system, more functionalities and applications have been revealed. This key reference on the topic covers important material that is ideal for materials scientists, materials engineers and materials chemists who have been introduced to metal oxides as a general category of materials, but want to take the next step and learn more about a specific material. Provides a complete resource on tin oxide materials systems, including in-depth discussions of properties, their synthesis, modelling methods, and applications Presents information on the well-investigated SnO2, but also includes discussions on its emerging stoichiometries, such as SnO and Sn3O4 Includes the most relevant applications in varistors, sensing devices, fuel cells, transistors, biological studies, and much more

Titanium Powder Metallurgy

Titanium Powder Metallurgy
Author: Ma Qian,Francis H. Froes
Publsiher: Butterworth-Heinemann
Total Pages: 648
Release: 2015-02-10
ISBN 10: 0128009101
ISBN 13: 9780128009109
Language: EN, FR, DE, ES & NL

Titanium Powder Metallurgy Book Review:

Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys