Handbook of Flotation Reagents Chemistry Theory and Practice

Handbook of Flotation Reagents  Chemistry  Theory and Practice
Author: Srdjan M. Bulatovic
Publsiher: Elsevier
Total Pages: 458
Release: 2007-02-19
ISBN 10: 9780080471372
ISBN 13: 0080471374
Language: EN, FR, DE, ES & NL

Handbook of Flotation Reagents Chemistry Theory and Practice Book Review:

Handbook of Flotation Reagents: Chemistry, Theory and Practice is a condensed form of the fundamental knowledge of chemical reagents commonly used in flotation and is addressed to the researchers and plant metallurgists who employ these reagents. Consisting of three distinct parts: 1) provides detailed description of the chemistry used in mineral processing industry; 2) describes theoretical aspects of the action of flotation reagents 3) provides information on the use of reagents in over 100 operating plants treating Cu, Cu/Zn, Cu/Pb, Zn, Pb/Zn/Ag, Cu/Ni and Ni ores. * Looks at the theoretical aspects of flotation reagents * Examines the practical aspects of using chemical reagents in operating plants * Provides guidelines for researchers and engineers involved in process design and development

Handbook of Flotation Reagents Chemistry Theory and Practice

Handbook of Flotation Reagents  Chemistry  Theory and Practice
Author: Srdjan M. Bulatovic
Publsiher: Elsevier
Total Pages: 238
Release: 2014-10-03
ISBN 10: 008093210X
ISBN 13: 9780080932101
Language: EN, FR, DE, ES & NL

Handbook of Flotation Reagents Chemistry Theory and Practice Book Review:

Handbook of Flotation Reagents: Chemistry, Theory and Practice is a condensed form of the fundamental knowledge of chemical reagents commonly used in flotation and is addressed to the researchers and plant metallurgists who employ these reagents. This book consists of three distinct parts: part 1 provides detailed description of the chemistry used in mineral processing industry; part 2 describes theoretical aspects of the action of flotation reagents, while part 3 provides information on the use of reagents in over 100 operating plants treating Cu, Cu/Zn, Cu/Pb, Zn, Pb/Zn/Ag, Cu/Ni and Ni ores. Looks at the theoretical aspects of flotation reagents Examines the practical aspects of using chemical reagents in operating plants Provides guidelines for researchers and engineers involved in process design and development

Handbook of Flotation Reagents Chemistry Theory and Practice

Handbook of Flotation Reagents  Chemistry  Theory and Practice
Author: Srdjan M. Bulatovic
Publsiher: Elsevier
Total Pages: 230
Release: 2010-09-15
ISBN 10: 9780080932095
ISBN 13: 0080932096
Language: EN, FR, DE, ES & NL

Handbook of Flotation Reagents Chemistry Theory and Practice Book Review:

Handbook of Flotation Reagents: Chemistry, Theory and Practice: Flotation of Gold, PGM and Oxide Minerals, Volume 2 focuses on the theory, practice, and chemistry of flotation of gold, platinum group minerals (PGMs), and the major oxide minerals, along with rare earths. It examines separation methods whose effectiveness is limited when using conventional treatment processes and considers commercial plant practices for most oxide minerals, such as pyrochlore-containing ores, copper cobalt ores, zinc ores, tin ores, and tantalum/niobium ores. It discusses the geology and mineralogy of gold, PGMs, and oxide minerals, as well as reagent and flotation practices in beneficiation. The book also looks at the factors affecting the floatability of gold minerals and describes PGM-dominated deposits such as Morensky-type deposits, hydrothermal deposits, and placer deposits. In addition, case studies of flotation and beneficiation in countries such as Canada, Africa, Russia, Chile, and Saudi Arabia are presented. This book will be useful to researchers, university students, and professors, as well as mineral processors faced with the problem of beneficiation of difficult-to-treat ores. Looks at the theoretical aspects of flotation reagents Examines the practical aspects of using chemical reagents in operating plants Provides guidelines for researchers and engineers involved in process design and development

Surface Chemistry of Froth Flotation

Surface Chemistry of Froth Flotation
Author: Jan Leja
Publsiher: Springer Science & Business Media
Total Pages: 758
Release: 2012-12-06
ISBN 10: 1461579759
ISBN 13: 9781461579755
Language: EN, FR, DE, ES & NL

Surface Chemistry of Froth Flotation Book Review:

The process of froth flotation is an outstanding example of applied surface chemistry. It is extensively used in the mining, mineral, metallurgical, and chemical industries for separation and selective concentration of individual minerals and other solids. Substances so concentrated serve as raw materials for producing appropriate metals and chemicals. The importance of flotation in technology is chiefly due to the ease with which it can be made selective and versatile and to the economy of the process. The objective of this book is to review the fundamentals of surface chemistry together with the relevant aspects of organic and inorganic chemistry that-in the opinion of the author-are important ~ control of the froth flotation process. The review updates the information that had been available in books by Sutherland and Wark (1955), Gaudin (1957), Klassen and Mokrousov (1963), and GIembotsky et al. (1963). It emphasizes mainly the surface chemical aspects of the process, leaving other relevant topics such as hydrodynamics, mechanical and electrical technology, cir cuit design and engineering, operations research, instrumentation tech nology, modeling, etc., to appropriate specialized treatments.

Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals

Extractive Metallurgy of Nickel  Cobalt and Platinum Group Metals
Author: Frank Crundwell,Michael Moats,Venkoba Ramachandran,Timothy Robinson,W. G. Davenport
Publsiher: Elsevier
Total Pages: 622
Release: 2011-07-18
ISBN 10: 0080968104
ISBN 13: 9780080968100
Language: EN, FR, DE, ES & NL

Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals Book Review:

This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author’s previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book Reviews extraction of multiple metals from the same tropical or arctic ore Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources

Handbook of Flotation Reagents

Handbook of Flotation Reagents
Author: Anonim
Publsiher: Unknown
Total Pages: 446
Release: 2007
ISBN 10: 1928374650XXX
ISBN 13: OCLC:921194078
Language: EN, FR, DE, ES & NL

Handbook of Flotation Reagents Book Review:

Flotation Technology

Flotation Technology
Author: Lawrence K. Wang,Nazih K. Shammas,William A. Selke,Donald B. Aulenbach
Publsiher: Springer Science & Business Media
Total Pages: 680
Release: 2010-06-09
ISBN 10: 1588294943
ISBN 13: 9781588294944
Language: EN, FR, DE, ES & NL

Flotation Technology Book Review:

The past 30 years have seen the emergence of a growing desire worldwide that positive actions be taken to restore and protect the environment from the degrading effects of all forms of pollution – air, water, soil, and noise. Since pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unreal- tic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identi?ed: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers formulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to speci?c pollution p- blems has been a major contributing factor to the success of environmental engineering and has accounted in large measure for the establishment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.

Beneficiation of Phosphate Ore

Beneficiation of Phosphate Ore
Author: Kawatra, S. Komar,Carlson, J.T.
Publsiher: Society for Mining, Metallurgy, and Exploration
Total Pages: 168
Release: 2013-12-16
ISBN 10: 0873353919
ISBN 13: 9780873353915
Language: EN, FR, DE, ES & NL

Beneficiation of Phosphate Ore Book Review:

Beneficiation of Phosphate Ore examines various methods for processing phosphate rock, an important mineral commodity used in the production of phosphoric acid. The majority of phosphoric acid is produced by the wet process, in which phosphate rock is reacted with sulfuric acid to produce phosphoric acid and gypsum (calcium sulfate dihydrate). This wet process demands a phosphate rock feed that meets certain specifications to produce phosphoric acid efficiently and economically. Beneficiation of Phosphate Ore thoroughly explains the methods used in beneficiation of different types of phosphate ores for use in the wet process. The mineralogical properties of the two major types of phosphate deposits, sedimentary and igneous, are described along with the processing methods. The benefits and disadvantages of each process are discussed in detail.

Mineral Processing Plant Design Practice and Control

Mineral Processing Plant Design  Practice  and Control
Author: Andrew L. Mular,Doug N. Halbe,Derek John Barratt
Publsiher: SME
Total Pages: 2422
Release: 2002
ISBN 10: 9780873352239
ISBN 13: 0873352238
Language: EN, FR, DE, ES & NL

Mineral Processing Plant Design Practice and Control Book Review:

Annotation Based on 138 proceedings papers from October 2002, this broad reference will become the new standard text for colleges and will become a must for engineers, consultants, suppliers, manufacturers.

Chemical Metallurgy

Chemical Metallurgy
Author: Chiranjib Kumar Gupta
Publsiher: John Wiley & Sons
Total Pages: 831
Release: 2006-03-06
ISBN 10: 3527605258
ISBN 13: 9783527605255
Language: EN, FR, DE, ES & NL

Chemical Metallurgy Book Review:

Chemical metallurgy is a well founded and fascinating branch of the wide field of metallurgy. This book provides detailed information on both the first steps of separation of desirable minerals and the subsequent mineral processing operations. The complex chemical processes of extracting various elements through hydrometallurgical, pyrometallurgical or electrometallurgical operations are explained. In the choice of material for this work, the author made good use of the synergy of scientific principles and industrial practices, offering the much needed and hitherto unavailable combination of detailed treatises on both compiled in one book.

Flotation

Flotation
Author: Ronald D. Crozier
Publsiher: Pergamon Press
Total Pages: 343
Release: 1992
ISBN 10: 9780080418643
ISBN 13: 0080418643
Language: EN, FR, DE, ES & NL

Flotation Book Review:

Flotation has become one of the most important techniques available for mineral processing. This work provides a unique and authoritative review of sulphide mineral collector properties, their manufacture and use with specific ores. Special emphasis is placed on the different flotation mechanisms involved in particle capture of sulphide and non-sulphide minerals and the effect of antagonal mechanisms on reagent selection. The author provides details, some previously unpublished, of the chemical properties, manufacture methods and possible surface active impurities of commercial collectors and frothers. In addition the chemical composition of a broad number of North American and European commercial reagent designations are listed. Ore sampling, sample preparation, testing machines and routines are covered as practical guides to mine laboratory staff. Suggestions to testing procedures, equipment selection and graphical data evaluation methods to multivariable problems are provided.

Froth Flotation

Froth Flotation
Author: Maurice C. Fuerstenau,Graeme J. Jameson,Roe-Hoan Yoon
Publsiher: SME
Total Pages: 891
Release: 2007
ISBN 10: 9780873352529
ISBN 13: 0873352521
Language: EN, FR, DE, ES & NL

Froth Flotation Book Review:

Froth Flotation: A Century of Innovation comprehensively describes the state-of-the-art research and practice in mineral froth flotation as known and practiced a century after its introduction. Recognized experts from around the world provide in-depth coverage on the historical aspects of flotation; flotation fundamentals; flotation chemistry; flotation cells, modeling, and simulation; and flotation plant practice. This commemorative volume is an invaluable reference for industry professionals, researchers, and graduate students. It continues a distinguished series that began with Froth Flotation: 50th Anniversary Volume (1962) and the A.M. Gaudin Memorial Volume (1976). The enclosed CD supplements the book with presentations from the Centenary of Flotation Symposium managed by the Australasian Institute of Mining and Metallurgy.

PbZn 2020 9th International Symposium on Lead and Zinc Processing

PbZn 2020  9th International Symposium on Lead and Zinc Processing
Author: A. Siegmund,S. Alam,J. Grogan,U. Kerney,E. Shibata
Publsiher: Springer Nature
Total Pages: 986
Release: 2020-01-24
ISBN 10: 3030370704
ISBN 13: 9783030370701
Language: EN, FR, DE, ES & NL

PbZn 2020 9th International Symposium on Lead and Zinc Processing Book Review:

Established in 1970, the PbZn symposium series is considered the leading international technical forum for the lead and zinc processing industries. The PbZn 2020 volume addresses all aspects of current processing technologies for primary and secondary lead and zinc, as well as emerging technologies for both metals.

Modeling and Simulation of Mineral Processing Systems

Modeling and Simulation of Mineral Processing Systems
Author: R. Peter King
Publsiher: Elsevier
Total Pages: 416
Release: 2012-12-02
ISBN 10: 0080511848
ISBN 13: 9780080511849
Language: EN, FR, DE, ES & NL

Modeling and Simulation of Mineral Processing Systems Book Review:

Dr. R. Peter King covers the field of quantitative modeling of mineral processing equipment and the use of these models to simulate the actual behavior of ore dressing and coal washing as they are configured to work in industrial practice. The material is presented in a pedagogical style that is particularly suitable for readers who wish to learn the wide variety of modeling methods that have evolved in this field. The models vary widely from one unit type to another. As a result each model is described in some detail. Wherever possible model structure is related to the underlying physical processes that govern the behaviour of particulate material in the processing equipment. Predictive models are emphasised throughout so that, when combined, they can be used to simulate the operation of complex mineral processing flowsheets. The development of successful simulation techniques is a major objective of the work that is covered in the text. Covers all aspects of modeling and simulation Provides all necessary tools to put the theory into practice

Handbook of Gold Exploration and Evaluation

Handbook of Gold Exploration and Evaluation
Author: Eoin Macdonald
Publsiher: Elsevier
Total Pages: 664
Release: 2007-02-21
ISBN 10: 1845692543
ISBN 13: 9781845692544
Language: EN, FR, DE, ES & NL

Handbook of Gold Exploration and Evaluation Book Review:

Designed for geologists and engineers engaged specifically in the search for gold deposits of all types and as a reference for academics in higher schools of learning, Handbook of gold exploration and evaluation provides principles and detailed explanations that underpin the correct interpretation of day-to-day experience in the field. Problems are addressed with regard to the analysis, interpretation and understanding of the general framework within which both primary and secondary gold resources are explored, developed and exploited. Handbook of gold exploration and evaluation covers a comprehensive range of topics including the nature and history of gold, geology of gold ore deposits, gold deposition in the weathering environment, sedimentation and detrital gold, gold exploration, lateritic and placer gold sampling, mine planning and practise for shallow deposits, metallurgical processes and design, and evaluation, risk and feasibility. Covers the nature and history of gold Addresses problems with regard to the framework in which gold resources are explored, developed and exploited Discusses topics including the geology of gold ore deposits, metallurgical processes and design, evaluation, risk and feasibility

Standard Methods for the Examination of Water and Wastewater

Standard Methods for the Examination of Water and Wastewater
Author: American Public Health Association
Publsiher: Unknown
Total Pages: 135
Release: 1915
ISBN 10: 1928374650XXX
ISBN 13: UOM:39015068248015
Language: EN, FR, DE, ES & NL

Standard Methods for the Examination of Water and Wastewater Book Review:

"The signature undertaking of the Twenty-Second Edition was clarifying the QC practices necessary to perform the methods in this manual. Section in Part 1000 were rewritten, and detailed QC sections were added in Parts 2000 through 7000. These changes are a direct and necessary result of the mandate to stay abreast of regulatory requirements and a policy intended to clarify the QC steps considered to be an integral part of each test method. Additional QC steps were added to almost half of the sections."--Pref. p. iv.

Mineral Processing Design

Mineral Processing Design
Author: B. Yarar,Z.M. Dogan
Publsiher: Springer Science & Business Media
Total Pages: 362
Release: 2012-12-06
ISBN 10: 9400935498
ISBN 13: 9789400935495
Language: EN, FR, DE, ES & NL

Mineral Processing Design Book Review:

This volume is based on the proceedings of the "NATO Advanced study Institute on Mineral Processing Design" held in Bursa-Turkey on August 24-31, 1984. The institute was organized by Professor B. Yarar of the Colorado School of Mines, Golden, Colorado, 80401, USA, Professor G. Ozbayoghu and Professor Z. M. Dogan of METU-Ankara, Turkey, who was the director. The purpose of the institute was to provide an international forum on the subject and update the information available. Participants were from Turkey, England, Greece, Spain, Portugal, Belgium, Canada, and the USA. Besides authors contributing to this volume, presentations were also made by Drs. Yarar, Raghavan, Schurger, and Mr. Kelland. Many assistants and colleagues helped. They are gratefully acknowledged. Acknowledgment is also owed to Drs. Ek, de Kuyper, and Tolun. Dr. Gfilhan Ozbayoglu, and Mr. S. Ozbayoglu were particularly helpful in the overall organization and hosting of many international guests. We owe them special thanks. NATO, Scientific Affairs Division, is gratefully acknowledged for the grant which made this activity possible. Z. M. Dogan B. Yarar 2 APPLIED MINERALOGY IN ORE DRESSING William Petruk CANMET, 555 Booth Street, Ottawa, Ontario, KIA OGI ABSTRACT Mineralogy applied to ore dressing is a reliable guide for designing and operating an efficient concentrator. A procedure for conductiqg mineralogical studies in conjunction with ore dressing was, therefore, developed. The procedure includes characterizing the ore and analysing the mill products.

Waste Production and Utilization in the Metal Extraction Industry

Waste Production and Utilization in the Metal Extraction Industry
Author: Sehliselo Ndlovu,Geoffrey S. Simate,Elias Matinde
Publsiher: CRC Press
Total Pages: 512
Release: 2017-06-27
ISBN 10: 1498767303
ISBN 13: 9781498767309
Language: EN, FR, DE, ES & NL

Waste Production and Utilization in the Metal Extraction Industry Book Review:

Increasingly stringent environmental regulations and industry adoption of waste minimization guidelines have thus, stimulated the need for the development of recycling and reuse options for metal related waste. This book, therefore, gives an overview of the waste generation, recycle and reuse along the mining, beneficiation, extraction, manufacturing and post-consumer value chain. This book reviews current status and future trends in the recycling and reuse of mineral and metal waste and also details the policy and legislation regarding the waste management, health and environmental impacts in the mining, beneficiation, metal extraction and manufacturing processes. This book is a useful reference for engineers and researchers in industry, policymakers and legislators in governance, and academics on the current status and future trends in the recycling and reuse of mineral and metal waste. Some of the key features of the book are as follows: Holistic approach to waste generation, recycling and reuse along the minerals and metals extraction. Detailed overview of metallurgical waste generation. Practical examples with complete flow sheets, techniques and interventions on waste management. Integrates the technical issues related to efficient resources utilization with the policy and regulatory framework. Novel approach to addressing future commodity shortages.

Bancroft s Theory and Practice of Histological Techniques E Book

Bancroft s Theory and Practice of Histological Techniques E Book
Author: Kim S Suvarna,Christopher Layton,John D. Bancroft
Publsiher: Elsevier Health Sciences
Total Pages: 654
Release: 2012-10-01
ISBN 10: 0702050326
ISBN 13: 9780702050329
Language: EN, FR, DE, ES & NL

Bancroft s Theory and Practice of Histological Techniques E Book Book Review:

This is a brand new edition of the leading reference work on histological techniques. It is an essential and invaluable resource suited to all those involved with histological preparations and applications, from the student to the highly experienced laboratory professional. This is a one stop reference book that the trainee histotechnologist can purchase at the beginning of his career and which will remain valuable to him as he increasingly gains experience in daily practice. Thoroughly revised and up-dated edition of the standard reference work in histotechnology that successfully integrates both theory and practice.Provides a single comprehensive resource on the tried and tested investigative techniques as well as coverage of the latest technical developments. Over 30 international expert contributors all of whom are involved in teaching, research and practice.Provides authoritative guidance on principles and practice of fixation and staining. Extensive use of summary tables, charts and boxes.Information is well set out and easy to retrieve. Six useful appendices included (SI units, solution preparation, specimen mounting, solubility). Provides practical information on measurements, preparation solutions that are used in daily laboratory practice. Color photomicrographs used extensively throughout. Better replicates the actual appearance of the specimen under the microscope. Brand new co-editors. New material on immunohistochemical and molecular diagnostic techniques.Enables user to keep abreast of latest advances in the field.

Reagents in Mineral Technology

Reagents in Mineral Technology
Author: P. Somasundaran
Publsiher: CRC Press
Total Pages: 768
Release: 1987-08-31
ISBN 10: 9780824777159
ISBN 13: 0824777158
Language: EN, FR, DE, ES & NL

Reagents in Mineral Technology Book Review:

Reagents in Mineral Technology provides comprehensive coverage of both basic as well asapplied aspects of reagents utilized in the minerals industry.This outstanding, single-source reference opens with an explicit account of flotation fundamentals, including coverage of wetting phenomena, mineral/water interfacial phenomena, flo tationchemistry, and flocculation and dispersion of mineral suspensions.It then discusses flotation of sulfide and nonsulfide minerals, with attention to formation ofclithiolates, formation of metal thiol compounds, application of fatty acids, sulfosuccinic acids, amines, and other collectors.Reagents in Mineral Technology also reviews adsorption of surfactants on minerals .. .details adsorption of polymers .. . and considers the chemistry and application of chelation agentsin minerals separations.Additional chapters consider grinding aids, frothers, inorganic and polymeric depressants, dewatering and filtering aids, analytical techniques, and much more.Unique in its depth of coverage, Reagents in Mineral Technology will prove an invaluablereference for mineral engineers and processors; analytical, surface, colloid, and physical chemists;petroleum, petrochemical, metallurgical, and mining engineers; and for use in advancedundergraduate- and graduate-level courses in these and related fiel