Fast And Effective Embedded Systems Design

Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded system design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed. C/C++ programming is applied, with a step-by-step approach which allows the novice to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues - intelligent instrumentation, networked systems, closed loop control, and digital signal processing. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology or technique introduced, and considers applications and the wider context. Numerous exercises and end of chapter questions are included. A hands-on introduction to the field of embedded systems, with a focus on fast prototyping Key embedded system concepts covered through simple and effective experimentation Amazing breadth of coverage, from simple digital i/o, to advanced networking and control Applies the most accessible tools available in the embedded world Supported by mbed and book web sites, containing FAQs and all code examples Deep insights into ARM technology, and aspects of microcontroller architecture Instructor support available, including power point slides, and solutions to questions and exercises

A hands-on introduction to the field of embedded systems; A focus on fast prototyping of embedded systems; All key embedded system concepts covered through simple and effective experimentation; An understanding of ARM technology, one of the world's leaders; A practical introduction to embedded C; Applies possibly the most accessible set of tools available in the embedded world. This book is an introduction to embedded systems design, using the ARM mbed and C programming language as development tools. The mbed provides a compact, self-contained and low-cost hardware core, and the on-line compiler requires no download or installation, being accessible wherever an internet link exists. The book further combines these with a simple "breadboard" approach, whereby simple circuits are built up around the mbed, with no soldering or pcb assembly required. The book adopts a "learning through doing" approach. Each chapter is based around a major topic in embedded systems. The chapter proceeds as a series of practical experiments; the reader sets up a simple hardware system, develops and downloads a simple program, and immediately observes and tests the outcomes. The book then reflects on the experimental results, evaluating the strengths and weaknesses of the technology or technique introduced, explores how precise the link is between theory and practice, and considers applications and the wider context. The only book that explains how to use ARM's mbed development toolkit to help the speedy and easy development of embedded systems. Teaches embedded systems core principles in the context of developing quick applications, making embedded systems development an easy task for the non specialist who does not have a deep knowledge of electronics or software All key concepts are covered through simple and effective experimentation

Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded systems design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed to start. C/C++ programming is applied, with a step-by-step approach which allows you to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues – intelligent instrumentation, wireless and networked systems, digital audio and digital signal processing. In this new edition all examples and peripheral devices are updated to use the most recent libraries and peripheral devices, with increased technical depth, and introduction of the "mbed enabled" concept. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology and techniques introduced, and considers applications in a wider context. New Chapters on: Bluetooth and ZigBee communication Internet communication and control, setting the scene for the ‘Internet of Things’ Digital Audio, with high-fidelity applications and use of the I2S bus Power supply, and very low power applications The development process of moving from prototyping to small-scale or mass manufacture, with a commercial case study. Updates all examples and peripheral devices to use the most recent libraries and peripheral products Includes examples with touch screen displays and includes high definition audio input/output with the I2S interface Covers the development process of moving from prototyping to small-scale or mass manufacture with commercial case studies Covers hot embedded issues such as intelligent instrumentation, networked systems, closed loop control, and digital signal processing

Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.

Embedded Systems with PIC Microcontrollers: Principles and Applications is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, the book provides an in-depth treatment of microcontroller design as well as programming in both assembly language and C, along with advanced topics such as techniques of connectivity and networking and real-time operating systems. In this one book students get all they need to know to be highly proficient at embedded systems design. This text combines embedded systems principles with applications, using the16F84A, 16F873A and the 18F242 PIC microcontrollers. Students learn how to apply the principles using a multitude of sample designs and design ideas, including a robot in the form of an autonomous guide vehicle. Coverage between software and hardware is fully balanced, with full presentation given to microcontroller design and software programming, using both assembler and C. The book is accompanied by a companion website containing copies of all programs and software tools used in the text and a ‘student’ version of the C compiler. This textbook will be ideal for introductory courses and lab-based courses on embedded systems, microprocessors using the PIC microcontroller, as well as more advanced courses which use the 18F series and teach C programming in an embedded environment. Engineers in industry and informed hobbyists will also find this book a valuable resource when designing and implementing both simple and sophisticated embedded systems using the PIC microcontroller. *Gain the knowledge and skills required for developing today's embedded systems, through use of the PIC microcontroller. *Explore in detail the 16F84A, 16F873A and 18F242 microcontrollers as examples of the wider PIC family. *Learn how to program in Assembler and C. *Work through sample designs and design ideas, including a robot in the form of an autonomous guided vehicle. *Accompanied by a CD-ROM containing copies of all programs and software tools used in the text and a ‘student' version of the C complier.

Rugged Embedded Systems: Computing in Harsh Environments describes how to design reliable embedded systems for harsh environments, including architectural approaches, cross-stack hardware/software techniques, and emerging challenges and opportunities. A "harsh environment" presents inherent characteristics, such as extreme temperature and radiation levels, very low power and energy budgets, strict fault tolerance and security constraints, etc. that challenge the computer system in its design and operation. To guarantee proper execution (correct, safe, and low-power) in such scenarios, this contributed work discusses multiple layers that involve firmware, operating systems, and applications, as well as power management units and communication interfaces. This book also incorporates use cases in the domains of unmanned vehicles (advanced cars and micro aerial robots) and space exploration as examples of computing designs for harsh environments. Provides a deep understanding of embedded systems for harsh environments by experts involved in state-of-the-art autonomous vehicle-related projects Covers the most important challenges (fault tolerance, power efficiency, and cost effectiveness) faced when developing rugged embedded systems Includes case studies exploring embedded computing for autonomous vehicle systems (advanced cars and micro aerial robots) and space exploration

Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System Double-Base Number System, Decimal Floating Point Number System and Continuous Valued Number System. Readers will learn the strategies and trade-offs of using unconventional number systems in application-specific processors and be able to apply and design appropriate arithmetic operations from these number systems to boost the performance of digital systems.

An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

In this new edition the latest ARM processors and other hardware developments are fully covered along with new sections on Embedded Linux and the new freeware operating system eCOS. The hot topic of embedded systems and the internet is also introduced. In addition a fascinating new case study explores how embedded systems can be developed and experimented with using nothing more than a standard PC. * A practical introduction to the hottest topic in modern electronics design * Covers hardware, interfacing and programming in one book * New material on Embedded Linux for embedded internet systems

Second in the series, Practical Aspects of Embedded System Design using Microcontrollers emphasizes the same philosophy of “Learning by Doing” and “Hands on Approach” with the application oriented case studies developed around the PIC16F877 and AT 89S52, today’s most popular microcontrollers. Readers with an academic and theoretical understanding of embedded microcontroller systems are introduced to the practical and industry oriented Embedded System design. When kick starting a project in the laboratory a reader will be able to benefit experimenting with the ready made designs and ‘C’ programs. One can also go about carving a big dream project by treating the designs and programs presented in this book as building blocks. Practical Aspects of Embedded System Design using Microcontrollers is yet another valuable addition and guides the developers to achieve shorter product development times with the use of microcontrollers in the days of increased software complexity. Going through the text and experimenting with the programs in a laboratory will definitely empower the potential reader, having more or less programming or electronics experience, to build embedded systems using microcontrollers around the home, office, store, etc. Practical Aspects of Embedded System Design using Microcontrollers will serve as a good reference for the academic community as well as industry professionals and overcome the fear of the newbies in this field of immense global importance.

Interested in developing embedded systems? Since they don’t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert who’s created embedded systems ranging from urban surveillance and DNA scanners to children’s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. It’s very well written—entertaining, even—and filled with clear illustrations." —Jack Ganssle, author and embedded system expert.

Intelligent readers who want to build their own embedded computer systems-- installed in everything from cell phones to cars to handheld organizers to refrigerators-- will find this book to be the most in-depth, practical, and up-to-date guide on the market. Designing Embedded Hardware carefully steers between the practical and philosophical aspects, so developers can both create their own devices and gadgets and customize and extend off-the-shelf systems. There are hundreds of books to choose from if you need to learn programming, but only a few are available if you want to learn to create hardware. Designing Embedded Hardware provides software and hardware engineers with no prior experience in embedded systems with the necessary conceptual and design building blocks to understand the architectures of embedded systems. Written to provide the depth of coverage and real-world examples developers need, Designing Embedded Hardware also provides a road-map to the pitfalls and traps to avoid in designing embedded systems. Designing Embedded Hardware covers such essential topics as: The principles of developing computer hardware Core hardware designs Assembly language concepts Parallel I/O Analog-digital conversion Timers (internal and external) UART Serial Peripheral Interface Inter-Integrated Circuit Bus Controller Area Network (CAN) Data Converter Interface (DCI) Low-power operation This invaluable and eminently useful book gives you the practical tools and skills to develop, build, and program your own application-specific computers.

This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.

This introduction to the design of embedded systems provides for hardware and software engineers the methodology, base of knowledge, and common problems in the field of embedded design. Included are discussions of device architecture, memory, I/O and development techniques. 5 photos, 95 line drawings, 12 tables.

The book is designed to serve as a textbook for courses offered to graduate and undergraduate students enrolled in electronics and electrical engineering and computer science. This book attempts to bridge the gap between electronics and computer science students, providing complementary knowledge that is essential for designing an embedded system. The book covers key concepts tailored for embedded system design in one place. The topics covered in this book are models and architectures, Executable Specific Languages – SystemC, Unified Modeling Language, real-time systems, real-time operating systems, networked embedded systems, Embedded Processor architectures, and platforms that are secured and energy-efficient. A major segment of embedded systems needs hard real-time requirements. This textbook includes real-time concepts including algorithms and real-time operating system standards like POSIX threads. Embedded systems are mostly distributed and networked for deterministic responses. The book covers how to design networked embedded systems with appropriate protocols for real-time requirements. Each chapter contains 2-3 solved case studies and 10 real-world problems as exercises to provide detailed coverage and essential pedagogical tools that make this an ideal textbook for students enrolled in electrical and electronics engineering and computer science programs.

The push to move products to market as quickly and cheaply as possible is fiercer than ever, and accordingly, engineers are always looking for new ways to provide their companies with the edge over the competition. Field-Programmable Gate Arrays (FPGAs), which are faster, denser, and more cost-effective than traditional programmable logic devices (PLDs), are quickly becoming one of the most widespread tools that embedded engineers can utilize in order to gain that needed edge. FPGAs are especially popular for prototyping designs, due to their superior speed and efficiency. This book hones in on that rapid prototyping aspect of FPGA use, showing designers exactly how they can cut time off production cycles and save their companies money drained by costly mistakes, via prototyping designs with FPGAs first. Reading it will take a designer with a basic knowledge of implementing FPGAs to the “next-level of FPGA use because unlike broad beginner books on FPGAs, this book presents the required design skills in a focused, practical, example-oriented manner. In-the-trenches expert authors assure the most applicable advice to practicing engineers Dual focus on successfully making critical decisions and avoiding common pitfalls appeals to engineers pressured for speed and perfection Hardware and software are both covered, in order to address the growing trend toward "cross-pollination" of engineering expertise

* Hardware/Software Partitioning * Cross-Platform Development * Firmware Debugging * Performance Analysis * Testing & Integration Get into embedded systems programming with a clear understanding of the development cycle and the specialized aspects of

Simon introduces the broad range of applications for embedded software and then reviews each major issue facing developers, offering practical solutions, techniques, and good habits that apply no matter which processor, real-time operating systems, methodology, or application is used.

This book presents the methodologies and for embedded systems design, using field programmable gate array (FPGA) devices, for the most modern applications. Coverage includes state-of-the-art research from academia and industry on a wide range of topics, including applications, advanced electronic design automation (EDA), novel system architectures, embedded processors, arithmetic, and dynamic reconfiguration.