Near Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining

Near Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining
Author: Kapil Gupta,Neelesh Kumar Jain
Publsiher: Springer
Total Pages: 135
Release: 2016-08-18
ISBN 10: 9811015635
ISBN 13: 9789811015632
Language: EN, FR, DE, ES & NL

Near Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining Book Review:

This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 μm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining.

Cylindrical Gears

Cylindrical Gears
Author: Heinz Linke,Jörg Börner,Ralf Heß
Publsiher: Carl Hanser Verlag GmbH Co KG
Total Pages: 874
Release: 2016-09-05
ISBN 10: 1569904901
ISBN 13: 9781569904909
Language: EN, FR, DE, ES & NL

Cylindrical Gears Book Review:

Unrivalled compendium on the development of gear units This book contains a complete presentation of all branches essential for the development of gear units, in particular that of cylindrical gears. The main subareas are geometry, load capacity, gear noise, design process, quality assurance, materials, heat treatment, and manufacturing. Further topics covered are material selection, strength values, the creation of drawings as well as practical design examples. The used technical terms and standards are based on the internationally valid and applied ISO standards. This book provides the basis for practical calculations and detailed analyses. It addresses graduate engineers in research, development and manufacturing departments as well as students and postgraduates in mechanical and plant engineering, as well as in automotive, aerospace and marine engineering.

International Gear Conference 2014 26th 28th August 2014 Lyon

International Gear Conference 2014  26th 28th August 2014  Lyon
Author: Philippe Velex
Publsiher: Chandos Publishing
Total Pages: 200
Release: 2014-09-18
ISBN 10: 1782421955
ISBN 13: 9781782421955
Language: EN, FR, DE, ES & NL

International Gear Conference 2014 26th 28th August 2014 Lyon Book Review:

This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. A truly international contribution with more than 120 papers from all over the world A judicious balance between fundamental research and industrial concerns Participation of the most respected international experts in the field of gearing A wide range of applications in terms of size, power, speed, and industrial sector

Frontiers of Manufacturing Science and Measuring Technology

Frontiers of Manufacturing Science and Measuring Technology
Author: Ran Chen,Wen Li Yao
Publsiher: Trans Tech Publications Ltd
Total Pages: 1580
Release: 2011-05-12
ISBN 10: 3038136069
ISBN 13: 9783038136064
Language: EN, FR, DE, ES & NL

Frontiers of Manufacturing Science and Measuring Technology Book Review:

Volume is indexed by Thomson Reuters CPCI-S (WoS). This book brings together 288 peer-reviewed papers on Manufacturing Science and Measuring Technology in order to promote the development of those fields, to strengthen international academic cooperation and communications and to exchange research ideas. It provides readers with a broad overview of the latest advances in the field of manufacturing science and measurement technology.

NBS Special Publication

NBS Special Publication
Author: Anonim
Publsiher: Unknown
Total Pages: 135
Release: 1918
ISBN 10: 1928374650XXX
ISBN 13: UOM:39015023123394
Language: EN, FR, DE, ES & NL

NBS Special Publication Book Review:

A Treatise on Toothed Gearing

A Treatise on Toothed Gearing
Author: John Howard Cromwell
Publsiher: Unknown
Total Pages: 272
Release: 1883
ISBN 10: 1928374650XXX
ISBN 13: WISC:89088931712
Language: EN, FR, DE, ES & NL

A Treatise on Toothed Gearing Book Review:

Theory of Gearing

Theory of Gearing
Author: Stephen P. Radzevich
Publsiher: CRC Press
Total Pages: 898
Release: 2018-05-15
ISBN 10: 0429999178
ISBN 13: 9780429999178
Language: EN, FR, DE, ES & NL

Theory of Gearing Book Review:

Written by a leading expert, Theory of Gearing: Kinematics, Geometry, and Synthesis, Second Edition is intended for engineers and researchers in the field of gear design, gear production, gear inspection, and application of gears. It focuses on the scientific theory of gearing, in all its aspects, and its application to new gear types and designs.

Hierarchical Composite Materials

Hierarchical Composite Materials
Author: Kaushik Kumar,J. Paulo Davim
Publsiher: Walter de Gruyter GmbH & Co KG
Total Pages: 188
Release: 2018-04-23
ISBN 10: 3110545101
ISBN 13: 9783110545104
Language: EN, FR, DE, ES & NL

Hierarchical Composite Materials Book Review:

Hierarchical Composite Materials provides an in-depth analysis of a class of advanced composites that have properties that are anisotropic due to structural organization at different length scales. Chapters address how ordering occurs from the atomic-scale up to the microstructure and how control of these factors leads to the final materials' properties. Manufacturing procedures, properties, and applications of different functionally graded materials are discussed in detail. This book is ideal for materials scientists, mechanical engineers, chemists and physicists.

Hybrid Machining Processes

Hybrid Machining Processes
Author: Kapil Gupta,Neelesh K. Jain,R. F. Laubscher
Publsiher: Springer
Total Pages: 68
Release: 2015-11-07
ISBN 10: 3319259229
ISBN 13: 9783319259222
Language: EN, FR, DE, ES & NL

Hybrid Machining Processes Book Review:

This book describes various hybrid machining and finishing processes. It gives a critical review of the past work based on them as well as the current trends and research directions. For each hybrid machining process presented, the authors list the method of material removal, machining system, process variables and applications. This book provides a deep understanding of the need, application and mechanism of hybrid machining processes.

Mechanisms and Mechanical Devices Sourcebook Fourth Edition

Mechanisms and Mechanical Devices Sourcebook  Fourth Edition
Author: Neil Sclater,Nicholas Chironis
Publsiher: McGraw Hill Professional
Total Pages: 512
Release: 2007-01-01
ISBN 10: 0071709495
ISBN 13: 9780071709491
Language: EN, FR, DE, ES & NL

Mechanisms and Mechanical Devices Sourcebook Fourth Edition Book Review:

Over 2000 drawings make this sourcebook a gold mine of information for learning and innovating in mechanical design The fourth edition of this unique engineering reference book covers the past, present, and future of mechanisms and mechanical devices. Among the thousands of proven mechanisms illustrated and described are many suitable for recycling into new mechanical, electromechanical, or mechatronic products and systems. Overviews of robotics, rapid prototyping, MEMS, and nanotechnology will get you up-to-speed on these cutting-edge technologies. Easy-to-read tutorial chapters on the basics of mechanisms and motion control will introduce those subjects to you or refresh your knowledge of them. Comprehensive index to speed your search for topics of interest Glossaries of terms for gears, cams, mechanisms, and robotics New industrial robot specifications and applications Mobile robots for exploration, scientific research, and defense INSIDE Mechanisms and Mechanical Devices Sourcebook, 4th Edition Basics of Mechanisms • Motion Control Systems • Industrial Robots • Mobile Robots • Drives and Mechanisms That Include Linkages, Gears, Cams, Genevas, and Ratchets • Clutches and Brakes • Devices That Latch, Fasten, and Clamp • Chains, Belts, Springs, and Screws • Shaft Couplings and Connections • Machines That Perform Specific Motions or Package, Convey, Handle, or Assure Safety • Systems for Torque, Speed, Tension, and Limit Control • Pneumatic, Hydraulic, Electric, and Electronic Instruments and Controls • Computer-Aided Design Concepts • Rapid Prototyping • New Directions in Mechanical Engineering

Machine tool Trade in Austria Hungary Denmark Russia and Netherlands

Machine tool Trade in Austria Hungary  Denmark  Russia  and Netherlands
Author: United States. Department of Commerce and Labor,Arthur B. Butman
Publsiher: Unknown
Total Pages: 24
Release: 1909
ISBN 10: 1928374650XXX
ISBN 13: COLUMBIA:CU57058474
Language: EN, FR, DE, ES & NL

Machine tool Trade in Austria Hungary Denmark Russia and Netherlands Book Review:

Special Agents Series

Special Agents  Series
Author: United States. Bureau of Foreign and Domestic Commerce
Publsiher: Unknown
Total Pages: 135
Release: 1910
ISBN 10: 1928374650XXX
ISBN 13: CORNELL:31924066400064
Language: EN, FR, DE, ES & NL

Special Agents Series Book Review:

Advances in Mechanical Engineering

Advances in Mechanical Engineering
Author: Alexander N. Evgrafov
Publsiher: Springer
Total Pages: 234
Release: 2019-04-03
ISBN 10: 3030119815
ISBN 13: 9783030119812
Language: EN, FR, DE, ES & NL

Advances in Mechanical Engineering Book Review:

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 7th conference "Modern Engineering: Science and Education", held at the Saint Petersburg State Polytechnic University in May 2018 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

Routledge French Technical Dictionary Dictionnaire technique anglais

Routledge French Technical Dictionary Dictionnaire technique anglais
Author: Yves Arden
Publsiher: Routledge
Total Pages: 816
Release: 2006-03-21
ISBN 10: 1134831706
ISBN 13: 9781134831708
Language: EN, FR, DE, ES & NL

Routledge French Technical Dictionary Dictionnaire technique anglais Book Review:

The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.

System Dynamics

System Dynamics
Author: Karl A. Seeler
Publsiher: Springer
Total Pages: 667
Release: 2014-08-26
ISBN 10: 1461491525
ISBN 13: 9781461491521
Language: EN, FR, DE, ES & NL

System Dynamics Book Review:

This unique textbook takes the student from the initial steps in modeling a dynamic system through development of the mathematical models needed for feedback control. The generously-illustrated, student-friendly text focuses on fundamental theoretical development rather than the application of commercial software. Practical details of machine design are included to motivate the non-mathematically inclined student.

Measurement Technology and Intelligent Instruments VIII

Measurement Technology and Intelligent Instruments VIII
Author: Wei Gao,Yasuhiro Takaya,Yongsheng Gao,Michael Krystek
Publsiher: Trans Tech Publications Ltd
Total Pages: 674
Release: 2008-06-12
ISBN 10: 3038131830
ISBN 13: 9783038131830
Language: EN, FR, DE, ES & NL

Measurement Technology and Intelligent Instruments VIII Book Review:

Volume is indexed by Thomson Reuters BCI (WoS). Measurement, rigorously defined as ‘ascertaining the size, amount or degree of a measurand by instrumental comparison with a standard unit or by indirect calculation based upon theory’, is what makes science and technology different to imagination. Measurement is essential in industry, commerce and daily life. In the manufacturing industry in particular, measurement and instrumentation technology play increasingly important roles not only in the traditional field of manufacturing but also in the new fields of micro/nano technology and bioengineering. This book presents recent advances in the use of measurement and instrumentation in the manufacturing industry. A wide range of topics are covered including: micro/nano-metrology,precision measurements,online and in-process measurements,surface metrology,optical metrology and image processing,bio-measurement, sensor technology,intelligent measurement and instrumentation,uncertainty, traceability and calibration and signal-processing algorithms.

Synthetics Mineral Oils and Bio Based Lubricants

Synthetics  Mineral Oils  and Bio Based Lubricants
Author: Leslie R. Rudnick
Publsiher: CRC Press
Total Pages: 1008
Release: 2013-02-04
ISBN 10: 1439855382
ISBN 13: 9781439855386
Language: EN, FR, DE, ES & NL

Synthetics Mineral Oils and Bio Based Lubricants Book Review:

Highlighting the major economic and industrial changes in the lubrication industry since the first edition, Synthetics, Mineral Oils, and Bio-Based Lubricants, Second Edition outlines the state of the art in each major lubricant application area. Chapters cover trends in the major industries, such as the use of lubricant fluids, growth or decl

Crack Detection for Aerospace Quality Spur Gears

Crack Detection for Aerospace Quality Spur Gears
Author: Anonim
Publsiher: Unknown
Total Pages: 16
Release: 2002
ISBN 10: 1928374650XXX
ISBN 13: NASA:31769000645831
Language: EN, FR, DE, ES & NL

Crack Detection for Aerospace Quality Spur Gears Book Review:

Health and Usage Monitoring System research and development involves analysis of the vibration signals produced by a gearbox throughout its life. There are two major advantages of knowing the actual lifetime of a gearbox component: safety and cost. In this report, a technique is proposed to help extract the critical data and present it in a manner that can be easy to understand. The key feature of the technique is to make it independent of speed, torque and prior history for localized, single tooth damage such as gear cracks. This extraction technique is demonstrated on two sets of digitized vibration data from cracked spur gears. Standard vibration diagnostic parameters are calculated and presented for comparison. Several new detection algorithms are also presented. The results of this study indicate that crack detection methods examined are not robust or repeatable. The proposed techniques provide a limited improvement to existing diagnostic parameters. Current techniques show that the cracks progressed at a much faster rate than anticipated which reduced available time for detection.

Southern Machinery

Southern Machinery
Author: Anonim
Publsiher: Unknown
Total Pages: 135
Release: 1913
ISBN 10: 1928374650XXX
ISBN 13: UIUC:30112061171655
Language: EN, FR, DE, ES & NL

Southern Machinery Book Review:

Handbook of Metric Drive Components

Handbook of Metric Drive Components
Author: Stock Drive Products (Firm).
Publsiher: Unknown
Total Pages: 135
Release: 1998
ISBN 10: 1928374650XXX
ISBN 13: PSU:000043575527
Language: EN, FR, DE, ES & NL

Handbook of Metric Drive Components Book Review: