Advanced Processing Properties And Applications Of Starch And Other Bio Based Polymers

Advanced Processing, Properties, and Applications of Starch and Other Bio-based Polymers presents the latest cutting-edge research into the processing and applications of bio-based polymers, for novel industrial applications across areas including biomedical and electronics. The book is divided into three sections, covering processing and manufacture, properties, and applications. Throughout the book, key aspects of sustainability are considered, including improved utilization of available natural resources, sustainable design possibilities, cleaner production processes, and waste management. Focuses on starch-based polymers, examining the latest advances in processing and applications with this valuable category of biopolymer Highlights industrial sustainability considerations at all steps of the process, including when sourcing materials, designing and producing products, and dealing with waste Supports the processing and development of starch and other bio-based polymers with enhanced functionality for advanced applications

This book gives a comprehensive overview of bionanocomposites, a class of materials that consist of a biopolymer matrix which is embedded with nanoparticles and natural fibres as reinforcement to produce novel material and achieve superior physico-chemical and mechanical properties. The book looks into the synthesis of various forms of nanoparticles, the fabrication methods, and the characterization of bionanocomposites. It also includes topics related to the sustainability and life prediction of bionanocomposites such as biodegradability, recycling, and re-use. An important aspect in the designing of bionanocomposites includes computational modeling, and the suitability of the bionanocomposites in various applications is presented. This book appeals to students, researchers, and scientists looking to gain fundamental knowledge, know about recent advancements in the research on bionanocomposites and their applications.

Polylactic Acid-Based Nanocellulose and Cellulose Composites offers a comprehensive account of the methods for the synthesis, characterization, processing, and applications of these advanced materials. This book fills a gap in the literature as the only currently available book on this topic. This book: Describes the procedures for the extraction of cellulose materials from different sources and characterization methods adopted for analyzing their properties Covers properties, processing, and applications of PLA biocomposites made using the extracted cellulose Discusses the effect of reinforcement of cellulose on the biopolymer matrix and the enhancement of biopolymer properties Examines current status, challenges, and future outlook in biocomposite research and applications The book serves as a reference for researchers, scientists, and advanced students in polymer science and engineering and materials science who are interested in cellulose polymer composites and their applications.

Nano-Bioremediation: Fundamentals and Applications explores how nano-bioremediation is used to remedy environmental pollutants. The book's chapters focus on the design, fabrication and application of advanced nanomaterials and their integration with biotechnological processes for the monitoring and treatment of pollutants in environmental matrices. It is an important reference source for materials scientists, engineers and environmental scientists who are looking to increase their understanding of bioremediation at the nanoscale. The mitigation of environmental pollution is the biggest challenge to researchers and the scientific community, hence this book provides answers to some important questions. As an advanced hybrid technology, nano-bioremediation refers to the integration of nanomaterials and bioremediation for the remediation of pollutants. The rapid pace of urbanization, massive development of industrial sectors, and modern agricultural practices all cause a controlled or uncontrolled release of environmentally-related hazardous contaminants that are seriously threatening every key sphere, including the atmosphere, hydrosphere, biosphere, lithosphere, and anthroposphere. Explores the current and potential applications of nano-bioremediation in the remediation of hazardous pollutants Outlines the major properties and classes of nanomaterials that make them efficient bioremediation agents Assesses the major challenges of effectively implementing bioremediation techniques at the nanoscale

Advanced Polymer Nanocomposites: Science Technology and Applications presents a detailed review of new and emerging research outcomes from fundamental concepts that are relevant to science, technology and advanced applications. Sections cover key drivers such as the rising demand for lightweight and high strength automotive parts, the need for sustainable packaging materials and conservation of flavor in the food, drinks and beverages industries, and defense initiatives such as ballistic protection, fire retardation and electromagnetic shielding. With contributions from international authors working at the cutting-edge of research, this book will be an essential reference resource for materials scientists, chemists, manufacturers and polymer engineers. Through recent advances in nanotechnology, researchers can now manipulate atoms to create materials and products that are changing the way we live our lives. These materials have enhanced properties, such as tensile strength, impact and scratch resistance, electrical and thermal conductivity, thermal stability and fire resistance. Combines processing, properties and advanced commercial applications Emphasizes synthesis and fabrication techniques Focuses on environmental and health aspects Covers future challenges, opportunities, recycling and sustainability Contains contributions from high-profile, cutting-edge international researchers

Nanocellulose is a versatile material that has received much attention from scientists working in a broad range of application fields, such as automotive, composites, adsorbents, paints, coatings, medical implants, electronics, cosmetics, pulp and paper, tissue engineering, medical, packaging, and aerogels. Industrial Applications of Nanocellulose and Its Nanocomposites provides an extensive, up-to-date review of this fast-moving research field. The chapters cover a wide range of aspects, including synthesis, surface modification, and improvement of properties toward target applications. The main objectives of the book are to reflect on recent advancements in the design and fabrication of advanced nanocellulose and discuss important requirements for each application, as well as the challenges that might be faced. The book also includes an overview of the current economic perspectives and safety issues, as well as future directions for nanocellulose-based materials. It will serve as a valuable reference resource for academic and industrial researchers, environmental chemists, nanotechnologists, chemical engineers, polymer chemists, materials scientists, and all those working in the manufacturing industries. Comprehensively covers a broad range of industrial applications. Includes case studies on economic perspectives, safety issues, and advanced development of nanocellulose-based products. Discusses nanocellulose production from biological waste.

This book provides the latest developments on safety practices utilized in composite manufacturing facilities for students, workers, engineers, and other participants. It includes commentary from academic experts in the field who present cutting-edge research on advanced composite materials. Illustrations, figures, and tables are included in this book in order to make it easier for students, workers, engineers, and other participants to understand the contents of this book. The end user knows the safety and health that should be practiced in composite industry and their right in composite industry. Besides that, the composites industry players can upgrade their current safety system to the recommended practiced system. A lot of problems are solved by integrate the current system and advanced technology system from extensive research.

The increasing use of composite materials over conventional materials has been a continual trend for over a decade. While the fundamental understanding of fiber reinforcement has not changed, many new material advancements have occurred, especially in manufacturing methods, and there is an ever-growing number of composite material applications across various industries. Polymer-Based Composites: Design, Manufacturing, and Applications presents the concepts and methods involved in the development of various fiber-reinforced composite materials. Features: Offers a comprehensive view of materials, mechanics, processing, design, and applications Bridges the gap between research, manufacturing science, and analysis and design Discusses composite materials composed of continuous synthetic fibers and matrices for use in engineering structures Presents codes and standards related to fiber-reinforced polymer composites Includes case studies and examples based on industrial, automotive, aerospace, and household applications This book is a valuable resource for advanced students, researchers, and industry personnel to understand recent advances in the field and achieve practical results in the development, manufacture, and application of advanced composite materials.

The growing interest in replacing petroleum-based products by inexpensive, renewable, natural materials will have a significant impact on sustainability, environment, and the polymer industry. This book provides scientists a useful framework to help take advantage of the latest research conducted in this rapidly advancing field enabling them to develop and commercialize their own products quickly and more successfully.

There is a growing demand for strategies to address the impact of polymers and plastics in ecosystems. The principles of green chemistry offer a good source of such strategies. Ecofriendly Functional Polymers: An Approach from Application-Targeted Green Chemistry provides a holistic overview of polymer chemistry, development, and applications in the context of these sustainability-driven principles. It encourages researchers to consider the principles of green chemistry, environmental impacts, and end-user needs as integral aspects for consideration at the earliest stages of any design process, and draws together key aspects of polymer chemistry, organic synthesis, experimental design, and applications in a single volume. Beginning with an authoritative guide to fundamental polymer chemistry and its impact in the current environmental context, the book then discusses a range of key theoretical and experimental aspects of designing eco-friendly functional polymers. Applications of ecofriendly functional polymers across an entire range of fields are discussed, and a selection of case studies highlights the implementation of theoretical and experimental information to address a broad selection of issues. Highlights the physicochemical principles of green chemistry and the development of biodegradable and recyclable polymers in this context Compiles key information connecting structural features with properties, experimental strategies, and appropriate applications into a single volume Discusses requirements and applications across a broad range of fields, supported by practical examples

Processing Technology for Bio-Based Polymers: Advanced Strategies and Practical Aspects brings together the latest advances and novel technologies surrounding the synthesis and manufacture of biopolymers, ranging from bio-based polymers to synthetic polymers from bio-derived monomers. Sections examine bio-based polymer chemistry, discuss polymerization process and emerging design technologies, cover manufacturing and processing approaches, explain cutting-edge approaches and innovative applications, and focus on biomedicals and other key application areas. Final chapters provide detailed discussion and an analysis of economic and environmental concerns, practical considerations, challenges, opportunities and future trends. This is a valuable resource for researchers, scientists and advanced students in polymer science, bio-based materials, nanomaterials, plastics engineering, biomaterials, chemistry, biotechnology, and materials science and engineering, as well as R&D professionals, engineers and industrialists interested in the development of biopolymers for advanced products and applications. Focuses on the processing of bio-based polymers, covering both traditional methods and innovative new approaches Offers novel opportunities and ideas for developing or improving technologies for biopolymer research, preparation and application Examines other key considerations, including reliability and end product, economic concerns, and environmental and lifecycle aspects

Green Biocomposites for Biomedical Engineering: Design, Properties, and Applications combines emergent research outcomes with fundamental theoretical concepts relevant to processing, properties and applications of advanced green composites in the field of biomedical engineering. The book outlines the design elements and characterization of biocomposites, highlighting each class of biocomposite separately. A broad range of biomedical applications for biocomposites is then covered, with a final section discussing the ethics and safety regulations associated with manufacturing and the use of biocomposites. With contributions from eminent editors and recognized authors around the world, this book is a vital reference for researchers in biomedical engineering, materials science and environmental science, both in industry and academia. Provides comprehensive information regarding current advances in the interdisciplinary field of eco-friendly green composite materials for biomedical applications Offers coverage of state-of-the-art physics-based advanced models used in composites Lists a broad range of characterization techniques and biomedical applications

Sustainable Biopolymer Composites: Biocompatibility, Self-healing, Modeling, Repair and Recyclability focuses on sustainable polymer composites also referred to as bio- composites. Vital aspects such as biodegradability, biocompatibility, repair and recyclability are discussed in detail. In addition, complexities like rapid and scalable processing, onsite repair, and minimal environmental effects are also covered along with the appropriateness of advanced polymer composites for structural applications in automotive, aviation and marine industries. This book will be an indispensable resource for scientists, engineers, physicists and chemists who are interested in the preparation, applications and repair analysis of bio-based composites and nano-composites for different types of applications. The composites repair process is extremely complex, hence it is essential to have a comprehensive understanding of damage mechanisms to apply the most suitable repair technique. Damage assessment using onsite inspection, e.g., NDT, THz techniques and the automated repair process for reliability and repeatability, are vital parameters when executing bonded composite repair. Furthermore, overall integrity and structural health monitoring of composites repair is also necessary. Features detailed information on damage detection, failure analysis and repair of advanced bio-polymer composites Emphasizes biocompatibility, degradation and recyclability of these materials Features key chapters on molecular dynamics, multi-scale modeling and self-healing Presents a roadmap for materials selection, processing and industrial utilization for a broad range of applications

Medical Textiles from Natural Resources provides systematic and comprehensive coverage of the fundamentals, production methods, processing techniques, characterization techniques, properties and applications of medical textile materials from natural resources. Medical textiles offer a variety of technical and functional properties valued in medical and healthcare sectors, often relating to hygiene. As medical textile products remain in close contact with the human body, the fibre must have characteristics such as biological compatibility, biological degradability, permeability and nontoxicity. Only materials from natural renewable sources have such characteristics. This book provides the latest information on a wide range of medical applications, from single suture and wound dressings, to implants and tissue scaffolds. It also offers a systematic review of the manufacture, properties and applications of technical textiles for medical use. Explains the latest technologies related to fibre extraction from natural sources, chemical treatments, weave constructions, fabric finishes and coatings. Describes innovative applications of nanomaterials in the treatment of textile fabric and the utilization of carbohydrate polymers in the preparation of nanoparticles deposited in nonwoven fabrics. Helps product designers to find appropriate materials from natural resources with the characteristics of biodegradability, renewability, biocompatibility and nontoxicity.

An in-depth exploration of natural fiber-reinforced composites and their applications In Natural Fiber-Reinforced Composites: Thermal Properties and Applications, a team of distinguished researchers delivers a comprehensive overview of the thermal properties of natural fiber-reinforced polymer composites ideal for readers seeking to make an informed decision regarding materials selection for the development of automotive and aerospace products. The book brings together information currently dispersed throughout the scientific literature and offers viable and environmentally friendly alternatives to conventional composites. It also reviews the potential for using natural fiber-reinforced composites in the automotive, mechanical, and civil engineering sectors. Included case studies highlight and illustrate the applications of natural fiber-reinforced composites, and the included mathematical models predict the improvement of relevant properties of the materials. This book also provides: A thorough overview of the thermal characterization of natural fiber-based hybrid composites Comprehensive explorations of the thermal properties of hybrid natural fiber reinforced thermoplastic composites Practical discussions of the thermal properties of sugar palm fiber and sisal fiber-based hybrid composites In-depth examinations of the thermal properties of flax fiber, pineapple leaf fiber, and grass and cane fiber hybrid composites Natural Fiber-Reinforced Composites: Thermal Properties and Applications is a must-read for materials scientists and polymer chemists, as well as chemists and engineering scientists working in industry.

This book presents an authoritative account of the potential of advanced composites such as composites, biocomposites, composites geopolymer, hybrid composites and hybrid biocomposites in aerospace application. It documents how in recent years, composite materials have grown in strength, stature, and significance to become a key material of enhanced scientific interest and resultant research into understanding their behavior for selection and safe use in a wide spectrum of technology-related applications. This collection highlights how their unique combination of superior properties such as low density, high strength, high elastic modulus, high hardness, high temperature capability, and excellent chemical and environmental stability are optimized in technologies within these field.

Design for Sustainability: Green Materials and Processes provides fundamental and practical knowledge surrounding product development applications throughout the entire lifecycle of green materials, ranging from conceptual design, material and manufacturing process selection, and environmental lifecycle assessment. In addition, several topics covering recent advances in the application of sustainable design within the automotive, building and construction, packaging and consumer product industries are also included in this book to provide practical examples of this philosophy in current applications. Lastly, a section on implementation of design for sustainability in education is added to aid readers that wish to introduce this philosophy to younger students. This book will be beneficial to researchers, students in higher education institutions, design practitioners and engineers in private and public sector organization with aspirations to develop sustainable products in the future. Design for sustainability is one of the primary focuses in human advancement nowadays, with the aim of developing products and services that meet the needs of the present without compromising the ability of future generations to meet their own needs. Provides an overview on materials and process design for sustainability Discusses theoretical aspects about design for sustainability Includes a discussion of the most recent advances and applications in design for sustainability

This book highlights the various types of polymer and nanocomposites that can be derived from biorenewable resources. It covers various aspects of biobased polymers and nanocomposites, including preparation, processing, properties, and performance, and the latest advances in these materials. It also includes recent findings from leading researchers in academia and industry, government, and private research laboratories around the globe, providing the latest information on biobased polymers and nanocomposites. Offering an overview of the entire production process, it guides readers through all stages, from the raw source materials, processing and property characterization to application performance. This book is suitable for professionals and researchers seeking in-depth practical information as well as the fundamental science behind this. It also serves as a point of reference for undergraduate and graduate students, as well as postdoctoral researchers working in the area of polymer and composites with a special emphasis on biobased materials.