Mold making Handbook

Mold making Handbook
Author: Günter Mennig,Klaus Stoeckhert
Publsiher: Hanser Pub Incorporated
Total Pages: 701
Release: 2013
ISBN 10: 9781569904466
ISBN 13: 1569904464
Language: EN, FR, DE, ES & NL

Mold making Handbook Book Review:

The Mold-Making Handbook is an essential resource for the plastics industry, providing all of the fundamental engineering aspects of mold design, construction, and manufacturing. Written by industry experts, this book captures the current state of the technique for all major processing methods. This third edition has been completely updated and includes new chapters on micro injection molds, rubber industry molds, and rapid prototyping. Separate sections describe the tool materials and various manufacturing and processing methods. This handbook appeals to a broad range of plastics professionals--from the beginner who is looking for an introduction to a key area of plastics processing to the specialist who needs a quick reading into related technical areas, which can result in ideas for their own work. The Mold-Making Handbook is extremely useful for engineers, designers, processors, technical sales reps, and students interested in all aspects of mold construction.

Mold making Handbook

Mold making Handbook
Author: Günter Mennig,... Stoeckhert-Mennig
Publsiher: Unknown
Total Pages: 561
Release: 1998
ISBN 10: 9783446182578
ISBN 13: 3446182578
Language: EN, FR, DE, ES & NL

Mold making Handbook Book Review:

Mold making Handbook

Mold making Handbook
Author: Klaus Stoeckhert
Publsiher: Unknown
Total Pages: 482
Release: 1983
ISBN 10:
ISBN 13: PSU:000011589860
Language: EN, FR, DE, ES & NL

Mold making Handbook Book Review:

The Prop Builder s Molding Casting Handbook

The Prop Builder s Molding   Casting Handbook
Author: Thurston James
Publsiher: Betterway Books
Total Pages: 238
Release: 1989-11-15
ISBN 10: 9781558701281
ISBN 13: 1558701281
Language: EN, FR, DE, ES & NL

The Prop Builder s Molding Casting Handbook Book Review:

The Prop Builder's Molding & Casting Handbook &break;&break;This is the first book to contain, in one comprehensive volume, every molding and casting procedure of use to the theater props builder (no matter what his or her level or proficiency). The author demonstrates the techniques involved in using more than thirty different materials ranging from papier-mache to breakaway glass. &break;&break;While the use of some materials–plaster and polyester resins, for example–is covered to some extent in other publications, information on the selection and use of rubber materials (latex, neoprene, silicone, and the urethanes) and the procedure for making breakaway windows and bottles is available only in The Prop Builder's Molding & Casting Handbook. &break;&break;Written in an easy, conversational style, the book will be useful to anyone involved with theater properties, puppetry, and costuming (as professionals or amateurs). It will also serve admirably the needs of students taking classes in those subjects. &break;&break;Completing the book is a special section on designing and building a vacuum forming machine suitable for use in constructing theater props. More than 450 photographs illustrate the step-by-step procedures explained throughout the entire text.

The Prop Builder s Molding Casting Handbook

The Prop Builder s Molding   Casting Handbook
Author: Thurston James
Publsiher: Penguin
Total Pages: 238
Release: 1989-11-15
ISBN 10: 1440322716
ISBN 13: 9781440322716
Language: EN, FR, DE, ES & NL

The Prop Builder s Molding Casting Handbook Book Review:

The Prop Builder's Molding & Casting Handbook This is the first book to contain, in one comprehensive volume, every molding and casting procedure of use to the theater props builder (no matter what his or her level or proficiency). The author demonstrates the techniques involved in using more than thirty different materials ranging from papier-mache to breakaway glass. While the use of some materials–plaster and polyester resins, for example–is covered to some extent in other publications, information on the selection and use of rubber materials (latex, neoprene, silicone, and the urethanes) and the procedure for making breakaway windows and bottles is available only in The Prop Builder's Molding & Casting Handbook. Written in an easy, conversational style, the book will be useful to anyone involved with theater properties, puppetry, and costuming (as professionals or amateurs). It will also serve admirably the needs of students taking classes in those subjects. Completing the book is a special section on designing and building a vacuum forming machine suitable for use in constructing theater props. More than 450 photographs illustrate the step-by-step procedures explained throughout the entire text.

Handbook of Molded Part Shrinkage and Warpage

Handbook of Molded Part Shrinkage and Warpage
Author: Jerry Fischer
Publsiher: William Andrew
Total Pages: 292
Release: 2012-12-31
ISBN 10: 1455730572
ISBN 13: 9781455730575
Language: EN, FR, DE, ES & NL

Handbook of Molded Part Shrinkage and Warpage Book Review:

How easy life would be if only moldings were the same size and shape as the mold. But they never are, as molders, toolmakers, designers and end users know only too well. Shrinkage means that the size is always different; warpage often changes the shape too. The effects are worse for some plastics than others. Why is that? What can you do about it? The Handbook of Molded Part Shrinkage and Warpage is the first and only book to deal specifically with this fundamental problem. Jerry Fischer’s Handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effect of molding process conditions, and explains why you never can have a single ‘correct’ shrinkage value. It goes on to demonstrate how to alleviate the problem through careful design of the molded part and the mold, and by proper material selection. It also examines computer-aided methods of forecasting shrinkage and warpage. And most important of all, the Handbook gives you the data you need to work with. . Authoritative and rooted in extensive industrial experience, the expert guidance contained in this handbook offers practical understanding to novices, and new insights to readers already skilled in the art of injection molding and mold making. Contains the answers to common problems and detailed advice on how to control mold and post-mold shrinkage and warpage. Case Studies illustrate and enrich the text; Data tables provide the empirical data that is essential for success, but hard to come by.

MouldMaking and Casting

MouldMaking and Casting
Author: Nick Brooks
Publsiher: Crowood
Total Pages: 176
Release: 2013-12-21
ISBN 10: 1847977308
ISBN 13: 9781847977304
Language: EN, FR, DE, ES & NL

MouldMaking and Casting Book Review:

Mouldmaking and Casting is a technical manual of the many techniques of this ancient craft and art form. With step-by-step illustrations, it explains the materials required and the processes involved to create reproductions of a range of pieces. The book covers traditional techniques as well as today's more advanced technical methods.

Plaster Mold and Model Making

Plaster Mold and Model Making
Author: Charles Chaney,Stanley Skee
Publsiher: Van Nostrand Reinhold
Total Pages: 144
Release: 1978-07-01
ISBN 10: 9780671764678
ISBN 13: 0671764675
Language: EN, FR, DE, ES & NL

Plaster Mold and Model Making Book Review:

Injection Molding Handbook

Injection Molding Handbook
Author: D.V. Rosato,Marlene G. Rosato
Publsiher: Springer Science & Business Media
Total Pages: 1460
Release: 2012-12-06
ISBN 10: 1461545978
ISBN 13: 9781461545972
Language: EN, FR, DE, ES & NL

Injection Molding Handbook Book Review:

This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.

The Essential Guide to Mold Making Slip Casting

The Essential Guide to Mold Making   Slip Casting
Author: Andrew Martin
Publsiher: Sterling Publishing Company
Total Pages: 159
Release: 2006
ISBN 10: 9781600590771
ISBN 13: 1600590772
Language: EN, FR, DE, ES & NL

The Essential Guide to Mold Making Slip Casting Book Review:

An overview : prototypes and molds -- Designing, creating, and using -- Tools & materials : Tools -- materials -- supplies -- equipment -- safety -- Plaster : Types -- Absorption rates -- Consistency -- Amounts -- Mixing -- Pouring -- Frosting -- Plaster prototypes -- Mold soap and other separators -- Storing -- Featured artist : Anne Kraus: a conversation with the materials -- One-piece molds : Handmade clay prototypes -- One-, two-, and three-template clay prototypes -- Footed forms -- Cups and saucers -- Plaster prototypes -- Featured artist : Tom Spleth: cups and only cups -- Multiple-piece molds : Making -- Handles -- Spouts -- Pitchers -- Tiles -- Lidded forms -- Hollow-cast feet -- Fruits and vegetables -- No-model molds -- Complex molds -- Master molds : Advantages -- Plaster masters -- Rubber masters -- Featured artists : Donna Polseno and Richard Hensley: slip casting in production -- Slip formulation : Deflocculation -- Types of slip-casting clay bodies -- Mixing equipment -- Mixing -- Specific gravity -- Viscosity -- Mixing wet and dry scraps -- Mixing large batches -- Featured artist : Richard Notkin: evolution is not an option -- It's essential -- Casting : Preparing slip -- Preparing molds -- Casting -- Removing castings -- Handling wet castings -- Assembling cast parts -- Drying castings -- Preparing castings for firing -- Firing -- Troubleshooting : Broken molds -- chipped molds -- "Plaster disasters"--Troubleshooting guide.

Modeller s Guide to Mould Making and Resin Casting

Modeller s Guide to Mould Making and Resin Casting
Author: Alex Hornor
Publsiher: Lightning Source Incorporated
Total Pages: 106
Release: 2010
ISBN 10: 9781906512576
ISBN 13: 1906512574
Language: EN, FR, DE, ES & NL

Modeller s Guide to Mould Making and Resin Casting Book Review:

Mold Making Handbook for the Plastics Engineer

Mold Making Handbook for the Plastics Engineer
Author: Klaus Stoeckhert
Publsiher: Hanser Gardner Publications
Total Pages: 482
Release: 1983-09-01
ISBN 10: 9780195207439
ISBN 13: 0195207432
Language: EN, FR, DE, ES & NL

Mold Making Handbook for the Plastics Engineer Book Review:

This bestselling handbook provides detailed, basic information on the design and manufacture of molds for injection, compression and transfer molding (casting, impregnating, winding, centrifugal casting, laminating), and molding of expandable polystyrene.

Plastic Product Material and Process Selection Handbook

Plastic Product Material and Process Selection Handbook
Author: Dominick V Rosato,Donald V Rosato,Matthew v Rosato
Publsiher: Elsevier
Total Pages: 618
Release: 2004-08-04
ISBN 10: 9780080514055
ISBN 13: 0080514057
Language: EN, FR, DE, ES & NL

Plastic Product Material and Process Selection Handbook Book Review:

This book is for people involved in working with plastic material and plastic fabricating processes. The information and data in this book are provided as a comparative guide to help in understanding the performance of plastics and in making the decisions that must be made when developing a logical approach to fabricating plastic products to meet performance requirements at the lowest costs. It is formatted to allow for easy reader access and this care has been translated into the individual chapter constructions and index. This book makes very clear the behaviour of the 35,000 different plastics with the different behaviours of the hundreds of processes. Products reviewed range from toys to medical devices, to cars, to boats, to underwater devices, containers, springs, pipes, aircraft and spacecraft. The reader's product to be designed and/or fabricated can be directly or indirectly related to plastic materials, fabricating processes and/or product design reviews in this book. *Essential for people involved in working with plastic material and plastic fabricating processes *Will help readers understand the performance of plastics *Helps readers to make decisions which meet performance requirements and to keep costs low

Advanced Mouldmaking and Casting

Advanced Mouldmaking and Casting
Author: Nick Brooks
Publsiher: Crowood
Total Pages: 160
Release: 2013-12-21
ISBN 10: 1847977235
ISBN 13: 9781847977236
Language: EN, FR, DE, ES & NL

Advanced Mouldmaking and Casting Book Review:

The scope and potential of mouldmaking and casting is fascinating, and makes it one of the most exciting processes available to today's craftsmen. Its opportunities have been developed and expanded further by a range of new methods and materials only recently made available to the domestic market. Aimed equally at the student with little pre-existing knowledge and the professional wishing to further their skill base, this book provides an invaluable learning and reference tool for the studio or workshop of any artist, model maker or designer. Covers: jesmonite mould making and casting, bioresin casting, life moulding silicone from the body, large-scale clay press moulding, embedding in clear resin, clay slip casting, plas-ti-shim moulding, and finishing. Supported by step-by-step sequences and full descriptions of traditional processes as well as new methods, it is illustrated throughout with 212 colour photographs.

Runner and Gating Design Handbook 3e

Runner and Gating Design Handbook 3e
Author: John P. Beaumont
Publsiher: Unknown
Total Pages: 400
Release: 2019-10-07
ISBN 10: 9781569905906
ISBN 13: 1569905908
Language: EN, FR, DE, ES & NL

Runner and Gating Design Handbook 3e Book Review:

For the first time, both the art and the science of designing runners and gates are presented in a concise format. Tried and true runner and gating design techniques successfully used with various materials and molding applications are described together with cutting edge new technologies. The book will help readers determine when to use what type of runner system and how to isolate molding problems generated by the gate and runner vs. other molding issues. Much emphasis is placed on the critical features in a hot runner design and how to determine what type of design is best for a specific application. Finally, readers will be able to separate the sales hype from reality when dealing with hot runner suppliers.

Extruder Mold Tile

Extruder  Mold   Tile
Author: Anderson Turner
Publsiher: The American Ceramic Society
Total Pages: 135
Release: 2008-01-01
ISBN 10: 1574982915
ISBN 13: 9781574982916
Language: EN, FR, DE, ES & NL

Extruder Mold Tile Book Review:

Extruder, Mold and Tile:Forming Techniques includes a wide variety of articles on forming techniques that go beyond throwing and handbuilding. Drawing primarily from articles published within the past 4 years, this book covers different techniques that utilize extruders or molds during the forming process and also includes tilemaking techniques. Discussions about molds and moldmaking, plaster, extruder use and projects, and tilemaking tips, techniques, and projects.

The Makeup Artist Handbook

The Makeup Artist Handbook
Author: Gretchen Davis,Mindy Hall
Publsiher: Taylor & Francis
Total Pages: 326
Release: 2017-06-26
ISBN 10: 1315514168
ISBN 13: 9781315514161
Language: EN, FR, DE, ES & NL

The Makeup Artist Handbook Book Review:

Learn first-rate techniques and tips from some of the best makeup artists in the business in the new edition of The Makeup Artist Handbook. Renown makeup pros Gretchen Davis and Mindy Hall bring an impressive set of experience in all areas to the book, including work on Teenage Mutant Ninja Turtles, Steve Jobs, The Wolf of Wall Street, Blue Jasmine, Star Trek, Pearl Harbor, HBO’s Looking and many other films and TV shows. This full-color, comprehensive new edition offers brand new photographs and on-the-job examples to demonstrate makeup techniques and fundamentals on topics such as beauty, time periods, black and white photography and up-to-date information on cutting-edge techniques like computer-generated characters, makeup effects, mold-making, air brushing, and plenty of information on how to work effectively on set.

Complete Casting Handbook

Complete Casting Handbook
Author: John Campbell
Publsiher: Elsevier
Total Pages: 1130
Release: 2011
ISBN 10: 1856178099
ISBN 13: 9781856178099
Language: EN, FR, DE, ES & NL

Complete Casting Handbook Book Review:

Part II: Casting Metallurgy 1. The Melt 2. Entrainment 3. Flow 4. Molds and Cores (updated and expanded) 5. Solidification Structure 6. Casting Alloys (new chapter) 7. Porosity 8. Cracks and Tears (new consolidated chapter) 9. Properties of Castings Part II: Casting Manufacture 10. The 10 Rules 11. Filling System Design Fundamentals 12. Filling System Components 13. Filling System Design Practice 14. Melting 15. Molding 16. Casting 17. Controlled Solidification Techniques 18. Dimensional Accuracy 19. Post-Casting Processing Index.

How to Make Injection Molds

How to Make Injection Molds
Author: Georg Menges,Paul Mohren
Publsiher: Hanser Gardner Publications
Total Pages: 540
Release: 1993-01-01
ISBN 10: 9780195210088
ISBN 13: 0195210085
Language: EN, FR, DE, ES & NL

How to Make Injection Molds Book Review:

Economic success in the plastics processing industry depends on the quality, precision, and reliability of its most common tool: the injection mold. Consequently, misjudgments in design and mistakes in the manufacturing of molds can result in grave consequences.

Computer Aided Injection Mold Design and Manufacture

Computer Aided Injection Mold Design and Manufacture
Author: J.Y.H. Fuh,M. W. Fu,A.Y.C. Nee
Publsiher: CRC Press
Total Pages: 392
Release: 2004-08-02
ISBN 10: 9780824753146
ISBN 13: 0824753143
Language: EN, FR, DE, ES & NL

Computer Aided Injection Mold Design and Manufacture Book Review:

Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implementation procedures, and system architectures that will lead to a fully automated or semi-automated computer-aided injection mold design system (CADIMDS). This invaluable guide in this challenging area of precision engineering summarizes key findings and innovations from the authors' many years of research on intelligent mold design technologies.